Page 6
Step 1: All parts in Box 1 are stored in the headboard, please open the zipper behind the headboard and take out the parts.
Page 7
Step 2: Attaching the Base Support & Buckle to the Headboard & Footboard 4pcs Step 3: Attaching the Bolts to the Headboard & Footboard 4pcs 4pcs...
Page 8
Step 4: Attaching the Leg to the Headboard & Footboard 4pcs Step 5: Attaching the to the RH Side Panel & LH Side Panel Bed Frame Support Bar 4pcs...
Page 9
Step 6: Attaching the Rear RH Corner Bracket & Rear LH Corner Bracket & Front LH Corner Bracket & Front RH Corner Bracket to the RH Side Panel & LH Side Panel 12pcs Step 7: Attaching the RH Side Panel & LH Side Panel to the Headboard and Footboard, hook the Corner Brackets onto the screws before tightening fully.
Page 10
Step 8: Attaching the Horizontal Support Rail to the RH Side Panel & LH Side Panel 8pcs 100% Step 9: Attaching the Fabric Base...
Page 11
Step 10: Attaching the Buckle Frame to the Rear Ottoman Metal Frame Step 11: Attaching the Side Ottoman Metal Frame & Central Support Rail to the Front Ottoman Metal Frame & Rear Ottoman Metal Frame 4pcs 4pcs 4pcs...
Page 12
Step 12: Attaching the Cross Rail to the Side Ottoman Metal Frame 4pcs Step 13: Attaching the Cross Rail to the Central Support Rail...
Page 13
Step 14: Attaching the Mattress Support to the Front Ottoman Metal Frame 4pcs Step 15: Attaching the Gas Strut to the LH Lift Mechanism & RH Lift Mechanism 4pcs...
Page 14
Step 16: Attaching the LH Lift Mechanism & RH Lift Mechanism to the RH Side Panel & LH Side Panel 8pcs 8pcs Step 17: Attaching the Side Ottoman Metal Frame to the LH Lift Mechanism & RH Lift Mechanism 6pcs...
Page 15
Step 18: Attaching the Slat to the Ottoman Metal Frame Warning: It is recommended to push the Centre Slat Caps into position before pushing down on the Side Slat Caps firmly.
Page 16
Step 19 Warning: Lock the buckle after close of gas-lift to avoid opening automatically. Warning: If you are experiencing problems closing your gas struts please refer to the last page for trouble shooting.
Care and Maintenance Here are some good tips to keep your new ottoman bed frame in tip-top condition. Cleaning To clean your new ottoman bed frame, we advise using a damp cloth if the fabric is dusty or a low suction vacuum. Do not use abrasive chemicals or bleach as this may damage the product.
Need help?
Do you have a question about the Ascot and is the answer not in the manual?
Questions and answers