Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EVBox BusinessLine 3
Summary of Contents for EVBox BusinessLine 3
- Page 1 EVBox BusinessLine 3r 3rd generation Retrofit manual LED-ring capacitive filter...
- Page 3 EVBox BusinessLine 3r 3rd generation Retrofit manual LED-ring capacitive filter...
-
Page 5: Table Of Contents
Contents 1. Introduction 2. Safety precautions 3. Tools and materials 4. Installation procedure 4.1. Prepare the work area 4.2. Remove the charging station cover 4.3. Install the LED-ring capacitive filter 4.4. Install the charging station cover 4.5. Test the charging station 5. -
Page 7: Introduction
1. Introduction 1. Introduction This Retrofit Manual tells you how to install a capacitive filter on the LED ring cable in the EVBox BusinessLine 3rd Generation charging station. You must carefully read the safety information before you start. Note: This manual is applicable to both single and double charging stations. -
Page 8: Safety Precautions
2. Safety precautions 2. Safety precautions DANGER: Servicing and repair of the charging station by a non-qualified person will result in the risk of electric shock, which will cause severe injury or death. • Only a qualified electrician is permitted to install, service, repair and relocate the charging station. -
Page 9: Tools And Materials
1a. Hex key, 5 mm. 1b. Hex key socket wrench, 5 mm.* * Use when the charging station is mounted on a wall bracket. Tools - optional EVBox Dual Socket Test Box, article number 462323 (or equivalent electrical vehicle test box CCS1). Materials... - Page 10 3. Tools and materials 1x capacitive filter kit (per charging Cleaning cloth. socket). Non-aggressive detergent cleaning spray. EVBox part number 100470. 1.1 Capacitive filter. 1.2 Identification label.
-
Page 11: Installation Procedure
4. Installation procedure 4. Installation procedure 4.1. Prepare the work area DANGER: Working on electric installations without proper precautions will result in the risk of electric shock, which will cause severe injury or death. • Read and obey the safety precautions at the beginning of this manual before you install, repair, service or use this charging station. -
Page 12: Install The Led-Ring Capacitive Filter
4. Installation procedure 2. Open the cover from the bottom and lift it off the charging station. Put the cover front side up in a place where it cannot get damaged. 3. For a double charging station remove the second cover in the same way. 4.3. -
Page 13: Install The Charging Station Cover
4. Installation procedure 2. Connect the capacitive filter to the LED-ring cable blue plug, then connect the capacitive filter to the control board blue and green sockets. 3. For a double charging station, repeat this procedure on the second station. 4.4. -
Page 14: Test The Charging Station
1. Remove the warning signs from the power supply. 2. Switch on electrical power to the charging station. 3. Test the charging station using the EVBox Dual Socket Test Box or by charging a vehicle as described in the applicable charging station User Manual. -
Page 15: Disclaimer
The present document is drawn up by way of information only and does not constitute an offer binding upon EVBox ("EVBox"). EVBox has compiled the contents of this document to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. - Page 16 5. Disclaimer...
- Page 18 UL EVBIM_112021 © EVBox Manufacturing B.V.
Need help?
Do you have a question about the BusinessLine 3 and is the answer not in the manual?
Questions and answers