Voyager AOM703 Owner's Manual

Voyager AOM703 Owner's Manual

7” flat panel color observation monitor

Advertisement

7" FLAT PANEL COLOR OBSERVATION
MONITOR OWNER'S MANUAL
AOM703 Features:
– 7" High Performance Color LCD Monitor
– Water Resistant Design
– Built-in Audio Speaker with Volume Control
and 12V Trigger
– 3 Camera (A/V) Input with Source Select Control
– Backlit Controls and Day/Night Picture Modes
for Nighttime Use
– Auto/Manual Power On
– Sun Visor Included
UDIOVOX
PECIALIZED
PPLICATIONS, L.L.C.
AOM703
S
S
Visit us at http://www.asaelectronics.com
Patent Pending
10R-020500
®
+

Advertisement

Table of Contents
loading

Summary of Contents for Voyager AOM703

  • Page 1 ® AOM703 7” FLAT PANEL COLOR OBSERVATION MONITOR OWNER'S MANUAL – AOM703 Features: – 7” High Performance Color LCD Monitor – Water Resistant Design – Built-in Audio Speaker with Volume Control and 12V Trigger – 3 Camera (A/V) Input with Source Select Control –...
  • Page 2 Important! – Please Read This Manual Before Installing! Congratulations on your purchase of a Voyager AOM703 LCD Observation Monitor. With proper installation and use, your AOM703 is designed to provide you with years of trouble-free operation. This manual contains important information required to properly install and operate the unit.
  • Page 3: Packing Contents

    PACKING CONTENTS: 90 DAY/ 12 MONTH LIMITED WARRANTY WARRANTY CARD LCD MONITOR SUN SHIELD 4” X 2” VELCRO QTY. 1 QTY. 1 QTY. 1 QTY. 1 5’ INTERMEDIATE HARNESS #8 X ¾” SELF DRILL BLACK SCREWS QTY. 1 (HARDWARE BAG) QTY.4 #10 X 5/16”...
  • Page 4: Controls And Operation

    Stand-By mode -Turned on by a stand-by trigger wire generally connected to the vehicles 12V reverse back up lights or turn signals. Manual Mode wiring - For manual mode operation, the AOM703 should be wired as follows: ACC (12V+) Red wire should be connected to the vehicles accessory feed.
  • Page 5 These buttons also serve as adjustment controls while in the Picture Adjustment Menu mode (see above section for details). *Note: The AOM703 requires +12V to be applied to the “Audio Enable” trigger input in order to activate the built-in speaker. If no audio output is heard from the...
  • Page 6: Installation Instructions

    11. Install the PanaVise® mount to the LCD monitor using the #10 self-drilling screws (included). **Important: Do not use screws other than those provided with the AOM703. Void of warranty and serious product damage will occur.
  • Page 7 5’ intermediate cable included with the AOM703 to connect the monitor to the junction box. If more cable length is needed, additional 5’ lengths of the intermediate cable can be purchased. (See the accessory list at the back of this manual for part number details.)
  • Page 8 (+12V) TRIGGER RIGHT STANDBY (+12V) TRIGGER LEFT STANDBY (+12V) (+12V) TRIGGER (+12V) TRIGGER AUDIO REVERSE STANDBY...
  • Page 9 REAR OBSERVATION INSTALLATION DISTANCE MARKER USE/INSTALLATION - PLACE INDICATOR MARKERS (CONE, BOX ANY REFERENCE OBJECT HANDY) BEHIND VEHICLE AS IN FIGURE A. - PLACE RANGE MARKER DECALS ON SCREEN OF MONITOR OVER IMAGE OF INDICATOR MARKERS ON GROUND BEHIND VEHICLE, AS VIEWED ON THE MONITOR SCREEN.
  • Page 10 10mm JUNCTION BOX MOUNTING TEMPLATE 30.4mm 10mm 14.8mm 60mm...
  • Page 11 ® PANAVISE MOUNT TEMPLATE (OPTIONAL ACCESSORY) 0.25 0.25 2.00 2.50 2.00 0.25 2.50...
  • Page 12: Troubleshooting

    TROUBLESHOOTING SYMPTOM CAUSE SOLUTION No power No +12V accessory, No Replace circuit fuse, monitor has protection ground, mis-wired/reversed device built-in/reset, check ground connection, verify power is being supplied Video/No audio White audio trigger wire Connect to +12V ACC or reverse light circuit, not powered, Volume adjust turn volume adjustment up down...
  • Page 13: Product Specifications

    PRODUCT SPECIFICATIONS LCD panel specifications: Size/Type 7” (diagonal) /TFT LCD Brightness 350 nit (min) 420 nit (typ.) Contrast Ratio 200 (min) 300 (typ.) View Angles Top (12 o’clock): 30 (min) (@ CR 10) Bottom (6 o’clock): 50 (min) Horizontal: 50 (min) Response Time Rise: 12ms (typ.) ;...

Table of Contents