Sears Pro-Form 735CS User Manual page 21

PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a UL-listedsurge protector,rated at 15 amps, with a 14-gauge cord of five feet or less in
length.
b. If the walking belt is overtightened,treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear rolleradjustment bolts counterclockwise,114of a
turn. When the walking belt is properly tightened, you
shouldbe able to lift each side of the walking belt 3 to
4 inches oft the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sert the key and run the treadmillfor a few minutes.
Repeat until the walking belt is properly tightened.
Rear Roller AdjustmentBolts
c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.
PROBLEM: The walking belt Is off-center
SOLUTION: a. If the walking belt has shifted to the left, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt
clockwise, and the right bolt counterclockwise,1/4 of a
turn each. Be careful not to overtighten the walking belt.
Plug in the power cord, insertthe key and run the tread-
mill for a few minutes. Repeat untilthe walking belt is
centered.
b*
If the walking belt has shlffed to the right, first re-
move the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the left rear rolleradjust-
ment bolt counterclockwise,and the right bolt clockwise,
1/4 of a turn each. Be careful not to overtightenthe
walking belt. Plug in the power cord, insertthe key and
run the treadmillfor a few minutes. Repeat until the
walking belt is centered.
PROBLEM: The walking belt slips when walked on
SOLUTION: a. If the walking belt slipswhen walked on, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear rolleradjustment bolts
clockwise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each side of
the walking belt 3 to 4 inches off the walking platform.
Be careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt
is properly tightened.
PROBLEM: The Incline of the treadmill does not change correctly or does not change when IFIT.com
CD'e and videos are played
SOLUTION: a. With the key inserted in the console, press one of the INCLINE buttons.While the Incline Is
changing, remove the key. After a few seconds, re-insert the key. The treadmill willautomati-
cally rise to the maximum incline level and then return to the minimum level. This willrecalibrate
the incline.
21