Sears Pro-Form 735CS User Manual page 17

Our new internet site at www.iFIT.com allows you to
access a large selectionof programs that interactively
controlyour treadmill to help you achieve your specific
exercise goals. In addition,you can play iFIT.com
audio and video programs directly from the internet.By
adding an optional upgrade module to the console,you
can use virtuallyendless features on our intemet site.
Explore www.iFIT.comfor details. To purchase an up-
grade module,call toll-free 1-800-735-0768.
To use programs from our internet site, the treadmill
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 14. In ad-
dition, you must have at least a 56K modem and an
accountwith an internet service provider.A list of addi-
tional system and software requirements will be found
on our internet site.
Next, make sure that the
on/off switch near the
power cord is in the on po-
sition. In addition, make
sure that the power cord is
properly plugged in (see
Position
HOW TO PLUG IN THE POWER CORD on page 8).
Followthe steps below to use a program from our
internet site.
B Insert the key fully into the console.
When the key is
inserted,the four dis-
plays and various indi-
cators on the console
will light.
B Press the PROGRAM button.
When the key is in-
serted, the manual
mode will be selected.
To use a program from
our internet site, press
the PROGRAM button.
The iFIT.com indicator
will light.
_lGo to your computer and start an Internet
connection.
D Start your web browser, If necessary, and go to
our internet site at www.IFIT.com.
1_'._Follow the desired links on our internet site to
select a program.
Read and follow the on-line instructions for usinga
program.
r_ Follow the on-line Instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
B Return to the tresdmlll and stand on the foot
rolls. Find the clip attached to the key and slide
the key onto the waistband of your clothing.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails,step ontothe walking belt, and
begin walking.
Duringthe program, an electronic"chirping" sound
will alert you when the speed and/or inclineof the
treadmill is aboutto change. CAUTION: Always
listen for the "chirp" and be prepared for speed
and/or Incline changes.
If the speed or inclinesettingsare too high or too
low, you can manually override the settingsat any
time by pressingthe SPEED or INCLINE buttons
on the console. However, when the next "chirp"
Is heard, the speed and/or Incline will change
to the next settings of the program.
To stop the program at any time, press the STOP
button on the console. The TIME/INCLINE/SEG
TIME display will begin to flash. To restart the pro-
gram, press the START buttonor the SPEED/k
button.After a moment, the walking belt will begin
to move at 1.0 mph. When the next "chirp" Is
heard, the speed and Incline will change to the
next settings of the program.
When the program is completed,the walkingbelt
will stopand the TIME/INCLINE/SEG TIME display
will begin to flash. Note: To use another program,
press the STOP buttonand go to step 5 above.
Note: If the speed or Incline of the treadmill
does not change when a "chirp" Is heard, make
sure that the IFIT.com Indicator Is lit and that
the TIMF-/INCLINE/SEG TIME display Is not
fleshing. In addition, make sure that the audio
cable Is properly connected, that it Is fully
plugged In, and that It Is not wrapped around a
power cord.
17