Subscribe to Our Youtube Channel
Related Manuals for Joy-it ONE C
Summary of Contents for Joy-it ONE C
- Page 1 ONE C ARD-One-C Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net...
-
Page 2: General Information
1. GENERAL INFORMATION Dear customer, thank you for purchasing our product. In the following we will show you what you need to bear in mind when commissioning and using. Should you encounter any unexpected problems during use, please do not hesitate to contact us. - Page 3 2. DEVICE OVERVIEW DC-In USB-C 7-12V programming interface 5 V voltage input Reset- button *ADC6 *D20 SCL0 ADC5 *MOSI1 *D21 *ADC7 SDA0 ADC4 *SDA1 *D23 AREF *D24 *SCL1 SCK0 IOREF / 5V MISO0 RESET ~D11 MOSI0 +3V3 ~D10 *MISO1 ADC0 *SCK1 ADC1 ADC2...
-
Page 4: Software Setup
3. SOFTWARE SETUP The Arduino IDE is usually used to program the board. You can download it here: https://www.arduino.cc/en/software Once you have downloaded and installed the software, you can start it. Before you can load a sketch, you need to make a few settings for the board. Select Tools →... -
Page 5: Code Example
4. CODE EXAMPLE To test your configuration, you can run a simple code example on your ONE- to do this, open the file under File → Examples → 01.Basics → Blink Now upload the example by clicking on Upload. This example code makes the LED on the board flash. - Page 6 SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn Return option in your area: We will send you a parcel stamp with which you can return the device to us free of charge. To do so, please contact us by e-mail at Service@joy-it.net or by telephone. Packaging information: Please pack your old appliance securely for transportation.
Need help?
Do you have a question about the ONE C and is the answer not in the manual?
Questions and answers