Related Manuals for Joy-it NANO V4 MINICORE
Summary of Contents for Joy-it NANO V4 MINICORE
- Page 1 NANO V4 MINICORE ARD-NanoV4-MC Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net...
-
Page 2: General Information
1. GENERAL INFORMATION Dear customer, thank you for purchasing our product. In the following we will show you what you need to bear in mind when commissioning and using. Should you encounter any unexpected problems during use, please do not hesitate to contact us. -
Page 3: Device Overview
2. DEVICE OVERVIEW USB-C programming interface 5 V voltage input SCK0 MISO0 +3V3 ~D11 MOSI0 AREF ~D10 MISO1 ADC0 SCK1 ADC1 ADC2 ADC3 SDA0 ADC4 SCL0 ADC5 ADC6 MOSI1 ADC7 RESET RESET SDA1 SCL1 ~ PWM pins... -
Page 4: Software Setup
3. SOFTWARE SETUP The Arduino IDE is usually used to program the board. You can download them here: https://www.arduino.cc/en/software Once you have downloaded and installed the software, you can start it. Before load sketch, need make settings for the board. First add this additional board manager URL under File →... -
Page 5: Code Example
Now select the appropriate board: Tools → Board → Minicore → ATmega328 At Tools → Port, select the port to which your device is connected. At Tools → Variant, select 328PB. And at Tools → Programmer select AVRISP mkll 4. CODE EXAMPLE To test your configuration, you can run a simple code example on your Na- noV4. - Page 6 SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn Return option in your area: We will send you a parcel stamp with which you can return the device to us free of charge. To do so, please contact us by e-mail at Service@joy-it.net or by telephone. Packaging information: Please pack your old appliance securely for transportation.
Need help?
Do you have a question about the NANO V4 MINICORE and is the answer not in the manual?
Questions and answers