1. Manuals
  2. Brands
  3. Tecnospiro Manuals
  4. Robotics
  5. 3arm 0 Series
  6. Instruction manual

Tecnospiro 3arm 0 Series Instruction Manual

Head annex
Hide thumbs Also See for 3arm 0 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
HEAD ANNEX
SERIES 0
SERIES 3
SERIES 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3arm 0 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tecnospiro 3arm 0 Series

Summary of Contents for Tecnospiro 3arm 0 Series

  • Page 1 INSTRUCTION MANUAL HEAD ANNEX SERIES 0 SERIES 3 SERIES 4...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS HEAD DETAILS S0 - S3 - S4 ........................6 TOOLS ................................9 SYMBOLS AND ICONS ..........................9 RECOMMENDED TOOLS FOR HEAD....................10 HEADS ................................11 VERTICAL - A .............................. 11 3.1.1 Installation and disassembly of the tool ................. 11 3.1.2 Spare parts............................
  • Page 3 3.14.2 Handlebar Type B: TIMSAND REINFORCED ................40 3.14.1 Spare parts............................42 3.15 FLAT ELECTROMAGNET - I........................43 3.15.1 Assembly of the tool ........................44 3.15.2 Spare parts............................44 3.16 ROTATIVE ELECTROMAGNET - J ......................45 3.16.1 Spare parts............................46 3.17 ADJUSTABLE STRAP - K ..........................
  • Page 4 3.27 DOUBLE ARTICULATED FLAT ROTATIVE - P ..................70 3.27.1 Spare parts............................70 3.28 DOUBLE ARTICULATED FLAT ROTATIVE - PA .................. 71 3.29 MULTIPOSITION REINFORCED WITH QUICK-CHANGE - Q ............72 3.29.1 Operation ............................73 3.29.2 Gimbal Type A: REINFORCED TIMCO ..................74 3.29.3 Gimbal Type B: TIMSAND REINFORCED ...................
  • Page 5 3.38.3 Spare parts............................106 3.39 GIRAFFE MULTIPOSITION - SN ......................107 3.39.1 Height adjustment ........................108 3.39.2 Movements and locking ......................109 3.39.3 Spare parts............................110 3.40 GIRAFFE MULTIPOSITION REINFORCED - SQ ................111 3.40.1 Spare parts............................112 3.41 GIRAFFE MULTIPOSITION REINFORCED SECURITY - SQA ............113 3.41.1 Spare parts............................

  • Page 6: Head Details S0 - S3 - S4

    1. HEAD DETAILS S0 - S3 - S4 - Vertical 0 kg - Vertical flat 0 kg - Vertical flat + Bush 0 kg - Vertical V-block 1 kg - Articulated rotative 1.5 kg 40100105 MV306904 MV306904 + M3Dxxx04 (Fixed) MV301804 MV3019A4 MV306904 + MV3PUxxx (Custom)
  • Page 7 - Articulated rotative electromagnet 1.5 kg - Adjustable strap 2.5 kg - Adjustable manual ball joint with vertical Adjustable auto ball joint with vertical - Adjustable manual ball joint horizontal adjustment 1.5 kg adjustment 1.7 kg M3323600 + MV3AM180 (Ø180R) M3146500 M3312600 M3312200...
  • Page 8 Auto revolving + Bush Manual revolving 4x90º + Bush 2 kg - Auto double revolving + Bush Giraffe multi-position 3.2 kg -Giraffe multi-position reinf. 3.8 kg (pistol grip tools) 3 kg M3150900 + MV3RUxxx (Custom) (angle tools) 5.5 kg MV30P704 + MV3MAxxx (Timco) MV30P804 + MV3JAxxx (Timco ref.) M41007A0 + MV3RUxxx (Custom) M4102000 + MVRxxx04 (Rotary)

  • Page 9: Tools

    2. TOOLS 2.1 SYMBOLS AND ICONS Throughout this manual you will see various symbols indicating the most suitable tool for that type of head. Their meanings are summarised below: Nutrunner pistol Sabre saw Straight impulse/impact Scanner Impulse/impact pistol Laser equipment Angle nutrunner Pliers Straight nutrunner...

  • Page 10: Recommended Tools For Head

    2.2 RECOMMENDED TOOLS FOR HEAD TORQUE & SCREWDRIVERS MACHINING OPTIC TOOLS ASSEMBLY Welding OTHERS Head Annex S0 - S3 - S4...

  • Page 11: Heads

    3. HEADS 3.1 VERTICAL - A 40100105 Maximum load: Maximum arm load Maximum torque: 150Nm Max. tool Ø: 52mm (Adaptable bushing) MAXIMUM TORQUE (Nm) Vertical Horizontal 3.1.1 Installation and disassembly of the tool 1- Put the tool (or the adapter bushing) in the Ø52H7 and tighten the bolts (1) (Allen key 5mm) To disassemble the tool, remove the upper bolt (1) and thread in an M8bolt (use a plate in the slot to release the tool).

  • Page 12: Spare Parts

    3.1.2 Spare parts VERTICAL HEADMEMBER 40100105 Head Annex S0 - S3 - S4...

  • Page 13: Vertical Flat - B

    3.2 VERTICAL FLAT - B MV306904 Maximum load: Maximum arm load 3.2.1 Spare parts MV306904R VERTICAL FLAT HEADMEMBER Head Annex S0 - S3 - S4...

  • Page 14: Vertical Flat - Ba

    3.3 VERTICAL FLAT - BA MV306904 + Bush Fixed flange (M3Dxxx04) Maximum load: Maximum arm load Ø: Specific diameter on request. Dimensions Ømin (mm) Ømax (mm) X (mm) Y (mm) ") ") ") (Ø2 ") Ø108 (19/32 9/16 57/64 Fixed flange ") ") ")

  • Page 15: Vertical V-Block - C

    3.4 VERTICAL V-BLOCK - C MV301804 Maximum load: Maximum arm load Not suitable for torque tools Cylindrical or irregularly shaped tools Ø : 40 mm/ Ø . 80 mm 3.4.1 Spare parts MV301804R VERTICAL HEADMEMBER - AJUSTABLE DIAMETER CLAMPING VICES REAR BASE MV301603 MV301703 CLAMPING VICES FRONT BASE...

  • Page 16: Articulated Rotative - D

    3.5 ARTICULATED ROTATIVE - D MV3019A4 Maximum load: Maximum arm load Maximum torque: 120Nm X: Rotates 360º. Manual locking in any position Z: Rotates ±90º. Manual locking in any position Max. tool diameter: 52mm (Adaptable bushing) MAXIMUM TORQUE (Nm) Vertical Horizontal Angle 3.5.1 Installation and disassembly of the tool...

  • Page 17: Spare Parts

    3.5.2 Spare parts ORIENTABLE HEADMEMBER MV3019A4 HANDLE M10x80 [Z axis] AC060576 AC060546 HANDLE M10x40 [X Axis] Head Annex S0 - S3 - S4...

  • Page 18: Articulated Flat Rotative - E

    3.6 ARTICULATED FLAT ROTATIVE - E MV302304 X: Rotates 360º. Manual locking in any position Z: Rotates ±90º. Manual locking in any position. Maximum load: Maximum arm load 3.6.1 Spare parts MV302304 ORIENTABLE FLAT HEADMEMBER RING ADAPTOR M3DXXX04 HANDLE M10x80 [Z axis] AC060576 HANDLE M10x40...

  • Page 19: Articulated Flat Rotative - Ea

    3.7 ARTICULATED FLAT ROTATIVE - EA MV302304 + Bush Fixed flange (M3Dxxx04) Dimensions Ømin (mm) Ømax (mm) X (mm) Y (mm) Z (mm) ") ") ") ") (Ø2 ") Ø108 (19/32 9/16 3/64 25/32 Fixed flange ") ") ") ") ") (Ø4 188.5...

  • Page 20: Articulated Flat Rotative Reinforced - Eb

    3.8 ARTICULATED FLAT ROTATIVE REINFORCED - EB MV30P504 Maximum load: Maximum arm load Maximum torque: 120Nm X: Rotates 360º. Manual locking in any position Z: Rotates ±90º. Manual locking in any position. FLAT JOINTED EB - REINFORCED - For applications where head locking is required - Larger, reinforced levers available - Suitable for torques up to 120 Nm - Equipped with linings for base axle (Z)

  • Page 21: Articulated Flat Rotative Reinforced - Ec

    3.9 ARTICULATED FLAT ROTATIVE REINFORCED - EC MV30P504 + Bush Fixed flange (M3Dxxx04) Dimensions Ømin (mm) Ømax (mm) X (mm) Y (mm) Z (mm) ") ") ") ") (Ø2 ") Ø108 (19/32 9/16 3/64 25/32 Fixed flange ") ") ") ") ") (Ø4...

  • Page 22: Automatic Articulated Flat Rotative - Ed

    3.10 AUTOMATIC ARTICULATED FLAT ROTATIVE - ED M3204700 Maximum load: Maximum arm load X: Rotates 360º. Manual locking in any position. Z: Rotates ±90º. Pneumatic locking in any position. 3.10.1 Operation The pneumatic lock (Z Axis) is activated/deactivated with the other radial arm locks: If the arm is equipped with L22 locking, then via the radial locking selector switch If the arm is equipped with the L92 locking device, then it is activated via the tool.

  • Page 23: Pneumatic Diagram

    3.10.2 Pneumatic diagram Head Annex S0 - S3 - S4...

  • Page 24: Spare Parts

    3.10.3 Spare parts AC060546 HANDLE M10x40 [X Axis] RADIAL ARM LOCKING CYLINDER MV405504 MV405903 CLAO SLEEVE CYL 42 MV4062A4 SPARE PARTS RADIAL LINING L22-L92 KIT M3DXXX04 RING ADAPTOR XXX corresponds to the inner Ø in mm Head Annex S0 - S3 - S4...

  • Page 25: Automatic Articulated Flat Rotative - Ee

    3.11 AUTOMATIC ARTICULATED FLAT ROTATIVE - EE M3204700 + Bush Fixed flange (M3Dxxx04) Dimensions Ømin (mm) Ømax (mm) X (mm) Y (mm) Z (mm) ") ") ") ") (Ø2 ") Ø108 (19/32 9/16 41/64 49/64 Fixed flange ") ") ") ") ") (Ø4...

  • Page 26: Articulated Rotative V-Block - F

    3.12 ARTICULATED ROTATIVE V-BLOCK - F MV302504 Not suitable for torque tools Cylindrical or irregularly shaped tools Ø : 40 mm/ Ø : 80 mm X: Rotates 360º. Manual locking in any position Z: Rotates ±90º. Manual locking in any position 3.12.1 Spare parts MV302504R ORIENTABLE &...

  • Page 27: Multiturn - Ga

    3.13 MULTITURN - GA MV3171C4 + Handlebar Maximum load: 10Kg/ 6kg Requires locks of (L50) or higher : Rotates ±90º. Non-lockable : Rotates 360º. Non-lockable Rotates 360º. Manual locking in 4 positions (4x90º) : Rotate 360º. Non-lockable Y: Rotates 360º. Non-lockable Consider 6kg max.

  • Page 28: Handlebar Type A: Timco

    3.13.1 Handlebar Type A: TIMCO Suitable for any type of tool. Ref: MV3EExxx (xxx = internal diameter in mm) - The X coordinate shall be as close as possible to the Z Axis of rotation to ensure good tool balancing. Xmin = 110mm Head Annex S0 - S3 - S4...
  • Page 29 3.13.1.1 TIMCO Dimensions Øint Øext Ømin - Ømax tool Inches Inches Inches " " 27-57 " - 2 " 3/64 1/16 " " " - 2 " 35 - 67 5/32 7/16 41/64 " " " - 3 " 45 - 77 35/64 53/64 49/64...
  • Page 30 (in the form of an "X"). In order to hold the tool in the correct way , Tecnospiro recommends the use of headless Allen bolts with ball tip for push pads. This component allows the tool to be fixed from all sides, adapting the pads to the surface of the tool.
  • Page 31 3.13.1.4 Gimbals maintenance and cleaning To keep the rotating gimbal clean, Tecnospiro recommends periodically blowing air into the gimbal while rotating the inner ring. The way to blow air inside the gimbals it is important, in order to remove dust accumulated in the groove.

  • Page 32: Handlebar Type B: Timsand

    3.13.2 Handlebar Type B: TIMSAND Suitable for tools with cylindrical clamping area. Ref: MV3EFxxx (xxx = internal diameter in mm) - The X coordinate shall be as close as possible to the Z Axis of rotation to ensure good tool balancing.
  • Page 33 3.13.2.1 Dimensions TIMSAND Øint. Øext. Ømin - Ømax tool Inches Inches Inches " " " - 1 " 30 - 40 37/64 23/32 3/16 37/64 " " 40 - 50 " - 1 " 31/32 7/64 37/64 31/32 " " 50 - 60 "...
  • Page 34 3.13.2.2 Assembly of the tool For the installation of the tool on gimbal type B follow the guidelines below. 1- Remove the headless bolts from the outer ring (2mm Allen key). 2- Insert the tool into the gimbal. Align the holes on the outer face of the outer ring with the headless bolts holding the tool.

  • Page 35: Handlebar Installation And Working Positions

    3.13.3 Handlebar installation and working positions The head has 2 positions: - 360° handlebar free rotation - Handlebar locking in one of the four positions (4x90º). Follow the guidelines below for the attachment and adjustment of the handlebar (either type A or B).

  • Page 36: Spare Parts

    3.13.4 Spare parts M3103300R SECURING LEVER M8x24 M3304100 POSITIONER MV331104 REPLACEMENT STUDS AND CAPS KIT Head Annex S0 - S3 - S4...

  • Page 37: Multiturn Reinforced - Ha

    3.14 MULTITURN REINFORCED - HA MV31E8A4 + Handlebar Maximum load: 32Kg ¾"  Requires locks of (L50) or higher : Rotates ±90º. Non-lockable : Rotates 360º. Non-lockable : Rotates 360º. Manual locking in 4 positions (4x90º) : Rotate 360º. Manual locking in any position Y: Rotates 360º.

  • Page 38: Handlebar Type A: Reinforced Timco

    3.14.1 Handlebar Type A: REINFORCED TIMCO Suitable for any type of tool. Ref: MV3DAxx (xxx = internal diameter in mm) - The X coordinate shall be as close as possible to the Z Axis of rotation to ensure good tool balancing.
  • Page 39 3.14.1.1 Dimensions of TIMCO REINFORCED Øint Øext Ømin - Ømax tool Inches Inches Inches " " " - 2 " 35 - 67 5/32 43/64 41/64 " " 45 - 73 " - 2 " 35/64 1/16 49/64 " " "...

  • Page 40: Handlebar Type B: Timsand Reinforced

    3.14.2 Handlebar Type B: TIMSAND REINFORCED Suitable for tools with cylindrical clamping area. Ref: MV3DBxxx (xxx = internal diameter in mm) - The X coordinate shall be as close as possible to the Z Axis of rotation to ensure good tool balancing.
  • Page 41 3.14.2.1 Dimensions TIMSAND reinforced Øint Øext Ømin - Ømax tool Inches Inches Inches " " " - 2 " 50 - 60 23/64 55/64 31/32 23/64 " " " - 2 " 60 - 70 23/64 " " " - 3 "...

  • Page 42: Spare Parts

    3.14.2.2 Included accessories In addition to type B gimbal (TIMSAND), nylon tipped headless bolts (M8x8) and metal headless bolts (DIN-913 M8x8) are included. By default it is supplied with the nylon tipped studs fitted. Depending on the type of tool, the Nylon studs may be replaced by metal studs to achieve a tighter-fitting diameter of the gimbal in relation to the tool.

  • Page 43: Flat Electromagnet - I

    3.15 FLAT ELECTROMAGNET - I MV306904 + MV3AM180 / MV3RM200 / MV3RM245 Maximum load: Maximum arm load* Z: Rotates 360º. Non-lockable Dimensions *Maximum load X (mm) Y (mm) Ø (mm) Ø (mm) ") ") ") ") (26.5 lbs) (Ø2 (Ø7 12 Kg Ø70 Ø178...

  • Page 44: Assembly Of The Tool

    3.15.1 Assembly of the tool To fit a drilling tool with a magnetic base you must: • Separate the magnetic base (1) from the rest of the tool (2). • Drill holes in the gimbal head (3) to allow the passage of the bolts fitting the two parts of the tool (1 and 2).

  • Page 45: Rotative Electromagnet - J

    3.16 ROTATIVE ELECTROMAGNET - J M3323600 + MV3AM180 / MV3RM200 / MV3RM245 Maximum load: Maximum arm load* : Rotates ±90º. Manual locking in any position : Rotates 360º. Non-lockable X: Rotates 360º. Manual locking in any position Dimensions *Maximum load X (mm) Y (mm) Ø...

  • Page 46: Spare Parts

    3.16.1 Spare parts HANDLE M10 CM163400 ADJUSTABLE HANDLE ASSY M3323700 ORIENTABLE PLATE Ø 180 MV3AM180 Maximum load: 12 kg ORIENTABLE PLATE Ø 200 MV3RM200 Maximum load: maximum arm load ORIENTABLE PLATE Ø 245 MV3RM245 Maximum load: maximum arm load Head Annex S0 - S3 - S4...

  • Page 47: Adjustable Strap - K

    3.17 ADJUSTABLE STRAP - K M3146500 Maximum load: Maximum arm load Z: 360º rotation X (mm) Y (mm) ") ") Dimensions (0 - 11 (Ø0 - Ø8 0 - 300 Ø0 - Ø225 13/16 55/64 Head Annex S0 - S3 - S4...

  • Page 48: Height Adjustment

    3.17.1 Height adjustment ") The rod has 4 points for working height adjustment, spaced 35mm apart. To adjust height: 1- Remove the bolt (1) (5mm Allen key). 2- Move the rod (2) to the desired point and tighten the bolt (1) (Allen key 5mm). 3.17.2 Spare parts M3146400 FASTENING STRAP Head Annex S0 - S3 - S4...

  • Page 49: Adjustable Manual Ball Joint With Vertical Adjustment - L

    3.18 ADJUSTABLE MANUAL BALL JOINT WITH VERTICAL ADJUSTMENT - L M3312200 Maximum load: 16 Kg Manual locking Z: Rotates 360º. Manual locking in any position. XZ plane: ±90º. Manual locking in any position. YZ plane: ±25º. Manual locking in any position. Adjustable stroke up to 175mm in Z Axis.

  • Page 50: Operation

    3.18.1 Operation Turning the knob (1) will lock the movement of the bracket (2). Turning the knob (3) will regulate the friction on the base (2) to adapt the smoothness of motion. Turning the lever (4) will lock the rotation of the whole assembly. 3.18.2 Height adjustment To adapt the vertical run for the assembly: 1- Loosen the headless bolts (1) (3mm Allen key).

  • Page 51: Grip Ends

    3.18.3 Grip ends All variants of the "Manfrotto" L-head offer two terminations for the attachment of the tool • End with four anchor points (direct clamping) • Termination with a single anchor point (clamped with plate) CLAMPING WITHPLATE DIRECT CLAMPING •...

  • Page 52: Addition Of Oil

    3.18.4 Addition of oil SAE 5-10 hydraulic oil should be used in cases where the system still does not function properly (does not lock) after the friction and rod adjustment has been carried out. 3.18.5 Manfrotto nord 468MG exploded view 3.18.6 Spare parts HEADMEMBER VERTICAL MV30C904...

  • Page 53: Adjustable Automatic Ball Joint With Vertical Adjustment - La

    3.19 ADJUSTABLE AUTOMATIC BALL JOINT WITH VERTICAL ADJUSTMENT - LA M3312300 Maximum load: 16Kg Pneumatic locking Z: Rotates 360º. Pneumatic locking in any position. XZ plane: ±90º. Pneumatic locking in any position. YZ plane: ±25º. Pneumatic locking in any position. Adjustable stroke up to 175mm in Z Axis.

  • Page 54: Operation

    3.19.1 Operation Activating the selector (1) will block the movement of the bracket (2). Turning the lever (3) will lock the rotation of the whole assembly. To adjust the friction, the smoothness of movement of the bracket (2). Loosen the two headless bolts (4) (2.5mm Allen key) and turn the cylinder assembly (5): - Turn clockwise for a smoother movement.

  • Page 55: Cylinder Stroke Adjustment

    3.19.3 Cylinder stroke adjustment To adjust the cylinder run (2) to achieve effective locking, follow the steps below: 1- The switch (3) must remain off, so that the termination remains free. 2- Loosen the headless bolts (1) (2.5mm Allen key). 3- Remove the cylinder (2) by turning it anticlockwise.

  • Page 56: Spare Parts

    3.19.4 Spare parts HEADMEMBER VERTICAL PNEUMATIC MV30D104 Maximum load: 18 Kg NH075006 CYLINDER NH027616 FITTING WITH SELECTOR Head Annex S0 - S3 - S4...

  • Page 57: Adjustable Manual Ball Joint Horizontal - Lb

    3.20 ADJUSTABLE MANUAL BALL JOINT HORIZONTAL - LB M3312600 Maximum torque: 25Nm Manual locking X: Rotates 360º. Manual locking in any position. XZ plane: ±90º. Manual locking in any position. XY plane: ±25º. Manual locking in any position. For operation [See Operation page 50].

  • Page 58: Adjustable Automatic Ball Joint Horizontal - Lc

    3.21 ADJUSTABLE AUTOMATIC BALL JOINT HORIZONTAL - LC M3312700 Maximum Torque: 25Nm Pneumatic locking X: Rotates 360º. Pneumatic locking in any position. XY plane: ±90º. Pneumatic locking in any position. XZ plane: ±25º. Pneumatic locking in any position. For operation [See Operation page 54].

  • Page 59: Adjustable Manual Ball Joint Vertical - Ld

    3.22 ADJUSTABLE MANUAL BALL JOINT VERTICAL - LD M3312400 Maximum load: 16 Kg Manual locking Z: Rotates 360º. Manual locking in any position. XZ plane: ±90º. Manual locking in any position. YZ plane: ±25º. Manual locking in any position. For operation [See Operation page 50].

  • Page 60: Adjustable Automatic Ball Joint Vertical - Le

    3.23 ADJUSTABLE AUTOMATIC BALL JOINT VERTICAL - LE M3312800 Maximum load: 16Kg Pneumatic locking Z: Rotates 360º. Pneumatic locking in any position. XZ plane: ±90º. Pneumatic locking in any position. YZ plane: ±25º. Pneumatic locking in any position. For operation [See Operation page 54].

  • Page 61: Reinforced Manual Ball Joint Vertical - Lh

    3.24 REINFORCED MANUAL BALL JOINT VERTICAL - LH M3312900 Maximum load: Maximum arm load Maximum Torque: 55Nm Z: Tilting ball ±30º x 360º. Manual locking in any position. XZ plane: ±30º. Manual locking in any position. YZ plane: ±30º. Manual locking in any position. 3.24.1 Operation Tightening/loosening the bolts (1) (6mm Allen key) will regulate the friction on the base to adapt the smoothness of movement.

  • Page 62: Pressure Support - M

    3.25 PRESSURE SUPPORT - M M3313700 Maximum load: 12Kg Requires locking of the swinging arm : Rotates ±90º. Non-lockable : Rotates 360º. Non-lockable. Tilting ball ± 20º X: Rotates 360º. Manual locking in 4 positions (4x90º) Manual locking (Lx1) or pneumatic locking (Lx2). Head Annex S0 - S3 - S4...

  • Page 63: Operation

    3.25.1 Operation This head allows pressure to be applied to a surface (e.g. a surface to be polished). At the same time, thanks to the ball head (Z movement), it can be adapted to the work surface (±20º). The tool is gripped by means of a coupling plate which must be designed for each case (Consult your 3arm®...

  • Page 64: Spare Parts

    3.25.2 Spare parts SECURING HANDLE M8x24 [Axis Z MV31J603R MV31T603 SPRING PRESSURE CAP RUBBER BELLOWS AC006596 MV31T703 BALL JOINT PRESSURE SUPPORT SPRING SECURING LEVER M8X18.5 [Axis X] AC004046 CM125100 POSITIONER MV31K703R POSITIONER Ø6x30 Head Annex S0 - S3 - S4...

  • Page 65: Multiposition With Quick-Change - N

    3.26 MULTIPOSITION WITH QUICK-CHANGE - N MV31F5A4 + Handlebar Maximum load: 10Kg/ 6kg ½"  : Rotates ±90º. Non-lockable : Rotates 360º. Non-lockable X: Rotates 360º. Manual locking in 4 positions (4x90º) Consider 6kg max. load for applications with Handlebar type A (TIMCO) when used with vibration tools (impact, impulse, etc.).

  • Page 66: Movements And Locking

    3.26.1 Movements and locking The positioner (1) releases/locks the X movement (360°, 4x90°) To remove the rod, release the positioner (1) and remove the pin (2). The friction can be adjusted using the adjustment knobs (3). Head Annex S0 - S3 - S4...

  • Page 67: Type A Gimbals: Timco

    3.26.2 Type A gimbals: TIMCO Suitable for any type of tool. Ref: MV3MAxxx (xxx = internal diameter in mm) ∅������ - Dimension X is approximately the external radius plus 12mm (�� = + 12) - Maximum load 6 kg for applications with vibration tools (impact, impulse, etc.) - Other dimensions on request ✓...

  • Page 68: Type B Gimbals: Timsand

    3.26.3 Type B gimbals: TIMSAND Suitable for tools with cylindrical clamping area. Ref: MV3PBxxx (xxx = internal diameter in mm) ∅������ - Dimension X is approximately the external radius plus 3mm (�� = + 3) - Maximum load 6 kg for applications with vibration tools (impact, impulse, etc.) - Other dimensions on request ✓...

  • Page 69: Spare Parts

    3.26.4 Spare parts HEADMEMBER MV31F5A4R Maximum load =12 kg GIMBAL TIMCO MV3MAXXX Maximum load = 12 Kg GIMBAL TIMSAND MV3PBXXX Maximum load = 12 Kg MV31J603R SECURING LEVER M8x24 [Axis Z AC004046 POSITIONER GN 607.1-6-A-ST POSITIONER CM125100 SECURING LEVER M8x18.5 MV31K703R REPLACEMENT STUDS AND CAPS KIT MV331104...

  • Page 70: Double Articulated Flat Rotative - P

    3.27 DOUBLE ARTICULATED FLAT ROTATIVE - P MV302404 Maximum load: Maximum arm load X: Rotates 360º. Manual locking in any position Y: Rotates ±90º. Manual locking in any position Z: Rotates ±90º. Manual locking in any position 3.27.1 Spare parts MV302404R HEADMEMBER HANDLE M10x80 [Axis Z]...

  • Page 71: Double Articulated Flat Rotative - Pa

    3.28 DOUBLE ARTICULATED FLAT ROTATIVE - PA MV302404 + Bush Fixed flange (M3Dxxx04) Maximum load: Maximum arm load Maximum torque: 120Nm X: Rotates 360º. Manual locking in any position Y: Rotates ±90º. Manual locking in any position Z: Rotates ±90º. Manual locking in any position Ø: Specific diameter on request.

  • Page 72: Multiposition Reinforced With Quick-Change - Q

    3.29 MULTIPOSITION REINFORCED WITH QUICK-CHANGE - Q MV30D2A4 + Handlebar Maximum load: 30Kg ¾"  : Rotates ±90º : Rotates 360º. Adjustment of smoothness for rotation and position setting X: Rotates 360º or 4x90º Recommended tool square size for this head In the case of vertical/horizontal work, pins will be fitted which will only allow the 4 positions at 90°.

  • Page 73: Operation

    3.29.1 Operation The positioner (1) releases/locks the X movement (360°, 4x90°) To remove the rod, release the positioner (1) and remove the positioner (2). The friction can be adjusted using the adjustment knobs (3). Due to the robustness of the positioner (1), vertical/horizontal work is not permitted. In cases where you have to work only vertically/horizontally, the pins (4) supplied must be inserted into the holes in the handlebar (the machined end of the pin remains outside the handlebar).

  • Page 74: Gimbal Type A: Reinforced Timco

    3.29.2 Gimbal Type A: REINFORCED TIMCO Suitable for any type of tool. Ref: MV3JAxxx (xxx = internal diameter in mm) ∅������ - Dimension X is approximately the external radius plus 76mm (�� = + 76) - Maximum load 6 kg for applications with vibration tools (impact, impulse, etc.) - Other dimensions on request ✓...

  • Page 75: Gimbal Type B: Timsand Reinforced

    3.29.3 Gimbal Type B: TIMSAND REINFORCED Suitable for any type of tool. Ref: MV3JBxxx (xxx = internal diameter in mm) ∅������ - Dimension X is approximately the external radius plus 62mm (�� = + 62) - Other dimensions on request ✓...

  • Page 76: Spare Parts

    3.29.4 Spare parts HEADMEMBER MV30D2A4R Maximum load 30 Kg GIMBAL TIMCO MV3JAXXX Maximum load = 30 Kg M3103300R SECURING LEVER M8x24 STAINLESS STEEL [Axis Z W5206400 POSITIONER M16x1.5 M3103400R LEVER M8 STAINLESS STEEL [Axis X] CM125000 POSITIONER Ø6x40 TIMCO STAINLESS STEEL BRAKE RETOUCH [Axis Z M3103200R REPLACEMENT STUDS AND CAPS KIT...

  • Page 77: Multiposition Reinforced Security With Quick-Change - Qa

    3.30 MULTIPOSITION REINFORCED SECURITY WITH QUICK-CHANGE - QA M3147600 + Handlebar Requires Locks on the swinging arm (Lx2) Maximum load: 30Kg ¾"  : Rotates ±90º. Non-lockable : Rotates 360º. Adjustment of smoothness for rotation and position setting X: Rotates 360º or 4x90º Recommended tool square size for this head In the case of vertical/horizontal work, pins will be fitted which will only allow the 4 positions at 90°.

  • Page 78: Movements And Locking

    3.30.1 Movements and locking The head is fitted with a safety system that locks the tilting arm when the tool is removed, thus preventing an accident. The positioner (1) releases/locks the X movement (360°, 4x90°) To remove the rod, release the positioner (1) and remove the positioner (2). When the handlebar is pulled out, the swinging arm will be locked to prevent a sudden upward movement.

  • Page 79: Pneumatic Diagram

    3.30.2 Pneumatic diagram Head Annex S0 - S3 - S4...

  • Page 80: Spare Parts

    3.30.1 Spare parts M3103300R SECURING LEVER M8x24 STAINLESS STEEL [Axis Z W5206400 POSITIONER M16x1.5 M3103400R LEVER M8 STAINLESS STEEL [Axis X] CM125000 POSITIONER Ø6x40 M3103200R TIMCO STAINLESS STEEL BRAKE RETOUCH [Axis Z MV331104 REPLACEMENT STUDS AND CAPS KIT HEAD TILTING BASE M3171600R Maximum load 30 kg M3279000...

  • Page 81: Multiposition Reinforced With Manual Brake - Qb

    3.31 MULTIPOSITION REINFORCED WITH MANUAL BRAKE - QB M3259000 + Handlebar Maximum load: 30Kg ¾"  : Rotates ±90º. Manual locking in any position : Rotates 360º. Adjustment of smoothness for rotation and position setting X: Rotates 360º or 4x90º Recommended tool square size for this head In the case of vertical/horizontal work, pins will be fitted which will only allow the 4 positions at 90°.

  • Page 82: Operation

    3.31.1 Operation The positioner (1) releases/locks the X movement (360°, 4x90°) To remove the rod, release the positioner (1) and remove the positioner (2). The handle (3) is used to block movement on the Z axis. Friction is adjusted using the adjustment knob (5). Use headless bolt (6) (4mm Allen key) to adjust friction on the X Axis.

  • Page 83: Spare Parts

    3.31.2 Spare parts M3103300R SECURING LEVER M8x24 STAINLESS STEEL [Axis Z W5206400 POSITIONER M16x1.5 CM151500 HANDLE M12 POSITIONER Ø6x40 CM125000 M3103200R TIMCO STAINLESS STEEL BRAKE RETOUCH [Axis Z MV331104 REPLACEMENT STUDS AND CAPS KIT HEAD TILTING BASE M3171600R Maximum load 30 kg M3279000 TILTING BASE REINFORCED WITH BUSHES Head Annex S0 - S3 - S4...

  • Page 84: Manual Revolving - R

    3.32 MANUAL REVOLVING - R MV404404 + Bush Rotary flange (MVRxxx04) Requires L92 Locks Suitable for angled tools X: Rotates 360º. Manual locking in 64 positions (64x5.6º) : Rotates 180º. Manual locking in 5 positions (5x45º) : Rotates 360º. Manual locking in 8 positions (8x45º) Dimensions Ømin (mm) Ømax (mm)
  • Page 85 To attach the tool to the head, follow the steps below: 1. Unlock the positioner (1). 2. Remove the bolts (2) (6mm Allen key) and loosen the headless bolt (3) (4mm Allen key). 3. Remove the snap ring (4) and the axial disc (5). 4.

  • Page 86: Cflange Change

    3.32.2 Cflange change To change the moving part, follow the instructions below: 1. Unscrew the small wheel (1). 2. Pull the lever (2) outwards and hold it in that position. 3. Remove the flange (3) and release the lever (2). 4.

  • Page 87: Movements And Locking

    3.32.3 Movements and locking The handle (1) releases/locks the Z movement (180°, 5x45°). The knob (2) releases/locks the X movement (360°, 64x5.6°). The positioner (3) releases/locks the Z movement (360°, 8x45°). Head Annex S0 - S3 - S4...

  • Page 88: Operation

    3.32.4 Operation Depending on the working position, Vertical (V), Horizontal (H) or Angle (A) the selectors must be positioned as defined in the picture. In case of pneumatic locking L92 + compensator, maintain the factory setting (all locked). When working at A (angle), the selectors shall be set to V (vertical) if a more vertical than horizontal position prevails, and H (horizontal) otherwise.

  • Page 89: Spare Parts

    3.32.5 Spare parts MV404404R HEADMEMBER TOOL SUPPORT ASSEMBLY "CAREV" = TOOL MVRXXX04 CHANGING CB004704 SECURING HANDLE ASSEMBLY [Axis Z MV331205 REPLACEMENT ECCENTRIC GRIP ASSEMBLY KIT CM123000 POSITIONER M16x1.5 FLOATING SPINDLE T2140801/00 3/4" MV328104 Torque max.: 300Nm Weigh: 1.5Kg / 0.7Ibs) ...

  • Page 90: Manual Revolving - Ra

    3.33 MANUAL REVOLVING - RA MV404404 + Bush Swinging flange (MVBxxx04) Requires L92 Locks Suitable for Straight Tools X: Rotates 360º. Manual locking in 64 positions (64x5.6º) Z: Rotates 180º. Manual locking 5 positions (5x45º) Y: Rotate Xº (depending on the tool) Dimensions Ømin (mm) Ømax (mm)

  • Page 91: Installation Of The Tool

    3.33.1 Installation of the tool To attach the tool to the head, follow the steps below: 1. Remove the bolts (1) (10mm Allen key). 2. Remove the flange (2) from the rest of the head. 3. Loosen the bolts (3) (5mm Allen key) that join the two parts of the flange (2). 4.

  • Page 92: Operation

    3.33.2 Operation Depending on the working position, Vertical (V), Horizontal (H) or Angle (A) the selectors must be positioned as defined in the picture. In case of pneumatic locking L92 + compensator, maintain the factory setting (all locked). When working at A (angle), the selectors shall be set to V (vertical) if a more vertical than horizontal position prevails, and H (horizontal) otherwise.

  • Page 93: Spare Parts

    3.33.3 Spare parts MV404404R HEADMEMBER CB004704 SECURING HANDLE ASSEMBLY [Axis Z MV331205 REPLACEMENT ECCENTRIC GRIP ASSEMBLY KIT MV32A003 SCREW SWING REVOLVER MVBXXX04 TOOL SUPPORT FLOATING SPINDLE T2140801/00 3/4" MV328104 Torque max.: 300Nm Weigh: 1.5Kg / 0.7Ibs)  FLOATING SPINDLE T2141212/00 1/2" MV328204 Torque max.: 150 Nm Weigh: 0.9 Kg / 0.4Ibs)

  • Page 94: Automatic Revolving - Ras

    3.34 AUTOMATIC REVOLVING - RAS M41007A0 + Bush Swinging flange (MVBxxx04) Requires L92 Locks Suitable for Straight Tools X: Rotates 360º. Manual locking in 64 positions (64x5.6º) Z: Rotates 180º. 32-position pneumatic locking (32x5.6º) Y: Rotate Xº (depending on the tool) Dimensions Ømin (mm) Ømax (mm)

  • Page 95: Operation

    3.34.1 Operation The pneumatic lock (Z Axis) is activated/deactivated with the other radial arm locks: If the arm is equipped with L22 locking, then via the radial locking selector switch If the arm is equipped with the L92 locking device, then it is activated via the tool. For more information, please refer to the arm manual.

  • Page 96: Pneumatic Diagram

    3.34.2 Pneumatic diagram Head Annex S0 - S3 - S4...

  • Page 97: Spare Parts

    3.34.3 Spare parts NH106300 O-RING 60x2 M31400A0 REVOLVER PISTON MV331205 ECCENTRIC GRIP ASSEMBLY REPLACEMENT KIT FLOATING SPINDLE T2140801/00 3/4" MV328104 Torque max.: 300Nm Weigh: 1.5Kg / 0.7Ibs)  FLOATING SPINDLE T2141212/00 1/2" MV328204 Torque max.: 150 Nm Weigh: 0.9 Kg / 0.4Ibs) ...

  • Page 98: Manual Revolving - Rb

    3.35 MANUAL REVOLVING - RB MV404404 + Bush Flange (MV3RUxxx) Requires L92 Locks Suitable for pistol type tools X: Rotates 360º. Manual locking in 64 positions (64x5.6º) Z: Rotates 180º. Manual locking 5 positions (5x45º) The X, Y, Z dimensions will depend directly on the chosen tool. Dimension A shall correspond to the scoring on the tool.

  • Page 99: Spare Parts

    3.35.1 Spare parts SECURING HANDLE ASSEMBLY [Axis Z CB004704 MV331205 ECCENTRIC GRIP ASSEMBLY REPLACEMENT KIT FLOATING SPINDLE T2140801/00 3/4" MV328104 Torque max.: 300Nm Weigh: 1.5Kg / 0.7Ibs)  FLOATING SPINDLE T2141212/00 1/2" MV328204 Torque max.: 150 Nm Weigh: 0.9 Kg / 0.4Ibs) ...

  • Page 100: Automatic Revolving - Rbs

    3.36 AUTOMATIC REVOLVING - RBS M41007A0 + Bush Flange (MV3RUxxx) Requires L92 Locks Suitable for pistol type tools X: Rotates 360º. Manual locking in 64 positions (64x5.6º) Z: Rotates 180º. Pneumatic locking in 32 positions (32x5.6º) The X, Y, Z dimensions will depend directly on the chosen tool. Dimension A shall correspond to the scoring on the tool.

  • Page 101: Spare Parts

    3.36.1 Spare parts NH106300 O-RING 60x2 M31400A0 REVOLVER PISTON MV331205 ECCENTRIC GRIP ASSEMBLY REPLACEMENT KIT FLOATING SPINDLE T2140801/00 3/4" MV328104 Torque max.: 300Nm Weigh: 1.5Kg / 0.7Ibs)  FLOATING SPINDLE T2141212/00 1/2" MV328204 Torque max.: 150 Nm Weigh: 0.9 Kg / 0.4Ibs) ...

  • Page 102: Manual Revolving 4X90º - Rc

    3.37 MANUAL REVOLVING 4x90º - RC M3150900 + Bush Flange (MV3RUxxx) Valid only for Series 3 X: Rotates 360º. Manual locking in 4 positions (4x90º) Z: Rotates 180º. Manual locking in 5 positions (5x45º) The X, Y, Z dimensions will depend directly on the chosen tool. For flange replacement [See Cflange change page 86].

  • Page 103: Automatic Double Revolving - Rs

    3.38 AUTOMATIC DOUBLE REVOLVING - RS M4102000 + Bush Rotary flange (MVRxxx04) Requires L92 Locks Suitable for angled tools X: Rotates 360º. Pneumatic locking in 64 positions (64x5.6º) : Rotates 180º. Pneumatic locking in 32 positions (32x5.6º) : Rotates 360º. Manual locking in 8 positions (8x45º) Dimensions Ømin (mm) Ømax (mm)

  • Page 104: Operational

    3.38.1 OPERATIONAL The RS head incorporates two automatic locks on the head rotation (Z Axis and X Axis). Through the mandatory use of a pneumatic locking system L92, when you operate your tool, the whole arm including the head will be locked instantly. However, the X Axis locking has an additional selector with which you can release or lock the tool: Position (1): Tool free Position (2): Tool locked.

  • Page 105: Pneumatic Diagram

    3.38.2 Pneumatic diagram Head Annex S0 - S3 - S4...

  • Page 106: Spare Parts

    3.38.3 Spare parts NH106300 O-RING 60x2 M31400A0 REVOLVER PISTON CM123000 POSITIONER M16x1.5 FLOATING SPINDLE T2140801/00 3/4" MV328104 Torque max.: 300Nm Weigh: 1.5Kg / 0.7Ibs)  FLOATING SPINDLE T2141212/00 1/2" MV328204 Torque max.: 150 Nm Weigh: 0.9 Kg / 0.4Ibs)  M3196200R ECCENTRIC RS LOCK ASSEMBLY MV326905R...

  • Page 107: Giraffe Multiposition - Sn

    3.39 GIRAFFE MULTIPOSITION - SN MV30P704 + Handlebar Maximum load: 10 Kg/ 6kg ½"  : Rotates 360º. Manual locking in 8 positions (8x45º) Z': Rotates 360º. Manual locking in 8 positions (8x45º) : Rotates 360º. Non-lockable X: Rotates 360º. Manual locking in 4 positions (4x90º) Consider 6kg max.

  • Page 108: Height Adjustment

    3.39.1 Height adjustment The height of the rod can be adjusted (3 positions 100mm apart) to suit the working conditions, to do that: 1- Remove the pin (1) (5 mm Allen key). 2- Move the rod (2) vertically until the holes in the rod are aligned with the housing of the pin (1). 3- Re-insert the pin (1) (5mm Allen key) in its original position.

  • Page 109: Movements And Locking

    3.39.2 Movements and locking Hand (1) releases/locks the Z movement (360°, 8x45°). Rotate the chuck (2) to release/lock the Z' movement (360°, 8x45°). The positioner (3) releases/locks the X movement (360°, 4x90°). To remove the rod, release the positioner (3) and pull out the pin (4). Using the adjustment knob (5) the X-friction can be adjusted.

  • Page 110: Spare Parts

    3.39.3 Spare parts GIMBAL TIMCO MV3MAXXX Maximum load = 12 Kg GIMBAL TIMSAND MV3PBXXX Maximum load = 12 Kg GIRAFFE MULTIPOSITION HEADMEMBER MV30P704R Maximum load 12 Kg CB004704 SECURING HANDLE ASSEMBLY [Axis Z SECURING LEVER M8x18.5 MV31K703R AC004046 POSITIONER GN 607.1-6-A-ST POSITIONER Ø6x30 CM125100 MV331104...

  • Page 111: Giraffe Multiposition Reinforced - Sq

    3.40 GIRAFFE MULTIPOSITION REINFORCED - SQ MV30P804 + Handlebar Maximum load: 30 Kg ¾"  : Rotates 360º. Manual locking in 8 positions (8x45º) Z': Rotates 360º. Manual locking in 8 positions (8x45º) : Rotates 360º. Adjustment of smoothness for rotation and position setting X: Rotates 360º.

  • Page 112: Spare Parts

    3.40.1 Spare parts GIMBAL TIMCO MV3JAXXX Maximum load = 30 kg GIRAFFE MULTIPOSITION HEADMEMBER MV30P804R Maximum load 30 kg SECURING HANDLE ASSEMBLY [Axis Z CB004704 M3103400R LEVER M8 [Axis X] POSITIONER Ø6x40 CM125000 M3103200R TIMCO STAINLESS STEEL LEVER RETOUCH [Axis Y] MV331104 REPLACEMENT STUDS AND CAPS KIT XXX corresponds to the inner Ø...

  • Page 113: Giraffe Multiposition Reinforced Security - Sqa

    3.41 GIRAFFE MULTIPOSITION REINFORCED SECURITY - SQA M3161600 + Handlebars Requires Locks on the swinging arm (Lx2) Maximum load: 30 Kg ¾"  : Rotates 360º. Manual locking in 8 positions (8x45º) Z': Rotates ±180º. Manual locking in 8 positions (8x45º) : Rotates 360º.

  • Page 114: Spare Parts

    For height adjustment [See Height adjustment page 108]. To view movements [See Movements and locking page 109]. Pneumatic diagram [See Pneumatic diagram page 79]. TIMCO type Handlebar [See Gimbal Type A: REINFORCED TIMCO page 74]. ✓ TIMCO dimensions [See Dimensions of TIMCO page 39].

  • Page 115: Giraffe Revolving - Sr

    3.42 GIRAFFE REVOLVING - SR MV30P604 + Bush Rotary flange (MVRxxx04) Requires L92 Locks Suitable for angled tools Maximum load: 30 Kg ¾"  : Rotates 360º. Manual locking in 8 positions (8x45º) ': Rotates 360º. Manual locking in 8 positions (8x45º) : Rotates 360º.

  • Page 116: Spare Parts

    For height adjustment [See Height adjustment page 108]. To view movements [See Movements and locking page 109]. To install the tool [See Installation of the tool page 84]. For flange replacement [See Cflange change page 86]. To see the flange movements [See Movements and locking page 87].

  • Page 117: Multiposition With Quick-Change - T

    3.43 MULTIPOSITION WITH QUICK-CHANGE - T MV31F5A4 + Handlebar Maximum load: 10Kg/ 6kg ½"  Requires Locks (L50) : Rotates ±90º. Non-lockable : Rotates 360º. Non-lockable X: Rotates 360º. Manual locking in 4 positions (4x90º) Y: Rotates 360º. Non-lockable To view movements [See Movements and locking page66].

  • Page 118: Type A Gimbals: Timco

    3.43.1 Type A gimbals: TIMCO Suitable for any type of tool. Ref: MV3LAxxx (xxx = internal diameter in mm) - The X dimension shall be as close as possible to the X axis of rotation to ensure good balancing of the tool. - Maximum load 6 kg for applications with vibration tools (impact, impulse, etc.).

  • Page 119: Type B Gimbals: Timsand

    3.43.2 Type B gimbals: TIMSAND Suitable for tools with cylindrical clamping area. Ref: MV3QBxxx (xxx = internal diameter in mm) - The X dimension shall be as close as possible to the X axis of rotation to ensure good balancing of the tool.

  • Page 120: Handlebar Adjustment And Reinforcement

    3.43.3 Handlebar adjustment and reinforcement Once the handlebar adjustment has been completed, it can be secured by using a DIN 7979 Ø6x30 pin to reinforce the retaining cylinder. To adjust height: Ensure that the angle between the retaining cylinder and the rod does not exceed ±15º. 1- Drill the handlebar using the existing hole in the retaining cylinder (1) as a guide (Drill bit Ø6mm) .

  • Page 121: Spare Parts

    3.43.4 Spare parts HEADMEMBER MV31F5A4R Maximum load =12 kg GIMBAL TIMCO MV3LAXXX Maximum load = 12 Kg GIMBAL TIMSAND MV3QBXXX Maximum load = 12 Kg MV31J603R SECURING LEVER M8x24 [Axis Z MV31K703R SECURING LEVER M8x18.5 POSITIONER GN 607.1-6-A-ST AC004046 POSITIONER Ø6x30 CM125100 MV331104 REPLACEMENT STUDS AND CAPS KIT...

  • Page 122: Multiposicion Reinforced With Quick-Change - U

    3.44 MULTIPOSICION REINFORCED WITH QUICK-CHANGE - U MV30D2A4 + Handlebar  ¾" Max. load 30 Kg Requires Locks (L50) : Rotates ±90º. Non-lockable : Rotates 360º. Manual locking in any position X: Rotates 360º. Manual locking in 4 positions (4x90º) Y: Rotates 360º.

  • Page 123: Movements And Locking

    3.44.1 Movements and locking The positioner (1) releases/locks the X movement (360º, 4x90º). To remove the rod, release the positioner (1) and remove the pin (2). Handlebar (3) releases/locks the movement in Z The friction can be adjusted using the adjustment knobs (4). Due to the robustness of the positioner (1), vertical/horizontal work is not permitted.

  • Page 124: Handlebar Type A: Reinforced Timco

    3.44.2 Handlebar Type A: REINFORCED TIMCO Suitable for any type of tool. Ref: MV3KCxxx (xxx = internal diameter in mm) - The X dimension shall be as close as possible to the X axis of rotation to ensure good balancing of the tool.

  • Page 125: Handlebar Type B: Timsand Reinforced

    3.44.3 Handlebar Type B: TIMSAND REINFORCED Suitable for any type of tool. Ref: MV3KBxxx (xxx = internal diameter in mm) - The X dimension shall be as close as possible to the X axis of rotation to ensure good balancing of the tool.

  • Page 126: Spare Parts

    3.44.4 Spare parts HEADMEMBER MV30D2A4R Maximum load 30 Kg HEAD TILTING BASE M3171600R Maximum load 30 kg M3279000 TILTING BASE REINFORCED WITH BUSHES SECURING LEVER M8x24 STAINLESS STEEL [Axis Z M3103300R W5206400 POSITIONER M16x1.5 LEVER M8 STAINLESS STEEL [Axis X] M3103400R CM125000 POSITIONER Ø6x40...

  • Page 127: Multiposition Reinforced Security With Quick-Change - Ua

    3.45 MULTIPOSITION REINFORCED SECURITY WITH QUICK-CHANGE - UA M3147600 + Handlebar Requires Locks on the swinging arm (Lx2) Maximum load: 30Kg ¾"  : Rotates ±90º. Non-lockable : Rotates 360º. Manual locking in any position X: Rotates 360º. Manual locking in 4 positions (4x90º) Y: Rotates 360º.

  • Page 128: Spare Parts

    3.45.1 Spare parts M3272700 HEAD TILTING BASE M3103300R SECURING LEVER M8x24 STAINLESS STEEL [Axis Z POSITIONER M16x1.5 W5206400 LEVER SUBSET M8 STAINLESS STEEL [Axis X] M3103400R POSITIONER Ø6x40 CM125000 TIMCO STAINLESS STEEL BRAKE RETOUCH [Axis Y] M3103200R CM166500 LEVER M12 [Axis Z REPLACEMENT STUDS AND CAPS KIT MV331104...

  • Page 129: Vertical Extension - W

    3.46 VERTICAL EXTENSION - W M3308900 + Extension Maximum load: Maximum arm load Z: Rotates 360º. Non-lockable. 3.46.1 Extensions There are 3 extensions to lengthen the vertical axis: Dimensions X (mm) Y (mm) ") ") Extension 250 59/64 21/32 ") ") Extension 500 49/64...

  • Page 130: Installation

    3.46.2 Installation 1- Insert the extension (1) into the head by matching the holes. 2- Fit and tighten the bolts (2) (6mm Allen key) and nuts (3) (13mm spanner). Multiple extensions may be used to cover longer distances. On request, the tilting base of any of the other heads can be installed with its corresponding handlebar or flange.

  • Page 131: Automatic Vertical Extension - Wa

    3.47 AUTOMATIC VERTICAL EXTENSION - WA M3283000 + Extension Maximum load: Maximum arm load Maximum torque: 300Nm Z: Rotates 360º. Pneumatic locking in 64 positions (5.6º) Extensions [See Extensions page 123]. To install the extension [See Installation page 130]. 3.47.1 Operation The pneumatic lock (Z Axis) is activated/deactivated with the other radial arm locks: If the arm is equipped with L22 locking, then via the radial locking selector switch If the arm is equipped with the L92 locking device, then it is activated via the tool.

  • Page 132: Pneumatic Diagram

    3.47.2 Pneumatic diagram Head Annex S0 - S3 - S4...

  • Page 133: Spare Parts

    3.47.3 Spare parts NH106300 O-RING 60x2 M31400A0 REVOLVER PISTON Head Annex S0 - S3 - S4...

  • Page 134: Automatic Vertical Extension - Wb

    3.48 AUTOMATIC VERTICAL EXTENSION - WB M3313900 + Extension Maximum load: Maximum arm load Maximum torque: 100Nm Z: Rotates 360º. Pneumatic locking in any position. Extensions [See Extensions page 123]. To install the extension [See Installation page 130]. To see operation [See Operation page 131].

  • Page 135: Pneumatic Diagram

    3.48.1 Pneumatic diagram Head Annex S0 - S3 - S4...

  • Page 136: Spare Parts

    3.48.2 Spare parts MV405504 RADIAL ARM LOCKING CYLINDER MV405903 CYLINDER COVER 42 MV4062A4 RADIAL PAD L22-L92 SPARE KIT Head Annex S0 - S3 - S4...

  • Page 137: Fork - Z

    3.49 FORK - Z MV309304 Maximum load: 12Kg 3.49.1 Spare parts MV31J603R FIXING LEVER M8x24 Head Annex S0 - S3 - S4...

  • Page 138: Reinforced Fork - Za

    3.50 REINFORCED FORK - ZA M3125600 Maximum load: Maximum arm load 3.50.1 Spare parts MV31J603R FIXING LEVER M8x24 Head Annex S0 - S3 - S4...

This manual is also suitable for:

3arm 3 series3arm 4 series3arm a3arm b3arm ba3arm c ... Show all

Table of Contents