GFI System SOLIS VENTUS User Manual page 24

Globals
Favorite Preset :
Looper Volume :
Looper Position
Looper Exit
Aux switch (Tip)
Aux switch (Ring)
Aux switch (Tip+Ring)
Note 1
Note 2
Note:
1. When a switch is assigned to any one these functions, holding the switch down will trigger
auto-ramping operation, which will be rolled back when switch hold is released. This is
applicable only for Tip switch and Ring switch. Ramping action is not supported for Tip+Ring
switch.
2. Momentary operation is supported. If you press the switch and hold it down for at least 1
second the DSP will return to original state when the switch is released. This can come in
handy when you wish to turn the effect on or off only momentarily.
[ Preset 1 default) to Preset 96 ]
When you assign the 'favorite' function (see next page) to an aux switch, you
can quickly call a favorite patch of your choosing by pressing that aux switch.
[ 1.0 to 10.0 (default) ].
Pre FX : Looper is positioned before delay/reverb.
: Looper is positioned after delay/reverb.
Post FX (default)
: Looper playback will stop when looper mode is exited.
STOP (default)
: Looper playback will continue when looper mode is exited.
PLAY
These are applicable only when Aux Switch Theme
is set to 'General Ops' (see next page).
* Bank Up - increment (scroll up) bank number by 1.
* Bank Down - decrement (scroll down) bank number by 1.
* Next Patch - Load next patch.
* Prev Patch - Load previous patch.
* Patch C - Load patch C (comes in handy when the on-board
C/Tap switch is reserved for tap-tempo).
* Fave Preset - Call the favorite preset.
* Bypass/Engage - Bypass / engage the pedal.
* Tap Tempo - Adjust the tempo with foot taps.
* X On/Off - Toggle DSP-X on and off.
* Y On/Off - Toggle DSP-Y on and off.
* Instant Auto-Ramp - Auto-ramping instantly triggered at switch press.
23
- Select your 'favorite' preset.