GFI System SOLIS VENTUS User Manual page 14

4. Looper
A 40 second stereo looper is available that works independently from the Delay and Reverb engines.
LED will turn cyan to indicate
the looper mode is active
C/TAP
record
Hold footswitch C/Tap
to enter looper mode
BEGIN
Overdubbing - once a loop track is recorded, each time you press the REC button (footswitch A/Y) a
new layer will be overdubbed on top of the track. You can do this as many time as you like.
Erasing - if you'd like to start afresh with a blank slate the existing loop track must first be erased.
Tap to confirm
A/Y
overdub
Tap footswitch A/Y
to start recording
Tap footswitch B/X to play the loop. Anytime foot-
Erase track?
YES
LED will turn violet to indicate
the looper is overdubbing
A/Y
OR
Tap footswitch A/Y
again to overdub
play
B/X
switch B/X is pressed it will re-trigger the loop
ABORT
13
C/TAP
stop
Tap footswitch C/Tap to
stop the loop
or
Hold footswitch C/Tap
to exit looper mode
stop
Double Tap
to enter the Erase menu.
Tap to abort