Peripherals; Security - NEC Versa 2500 Series Manual

Peripherals

The Peripherals screen displays the connection location
between the system and the Input/Output (I/O) ports.

Security

Your NEC Versa supports a password for system security
on several levels. Using the Security screen, you can require
that a password be entered
T
to use Setup
T
at each startup or boot
T
each time the system resumes from Suspend mode.
You are not prompted to enter a password until you set an
initial password. Your system is not protected until you set
a password.
Once you set a password, you must enter it before you can
enter Setup; this feature allows only an authorized user to
change system parameters. In addition, you can choose to
require the password be entered each time you start the
system and each time the system resumes from Suspend
mode.
3-8 Using Setup and Power Management