The Boot Setup Menu - NEC Versa 2400 Series Service Manual

Introduction 1-15
Press the F2 key to run the BIOS Setup program. The BIOS Setup program is organized
into two pages of menus. Change settings using the PgDn and PgUp keys. To move from
one option to another, you use the up and down arrow keys while using the spacebar and -
keys to change the settings.
To exit the BIOS Setup program, simply press the Esc key and select from the pop-up
window whether you want to load the default values for all fields; save your changes and
exit; or exit without saving any changes.

THE BOOT SETUP MENU

The boot setup menu allows you to change the following configurations:
Figure 1-15 The Bootup Setting Menu
The boot setup menus let you configure system settings as listed in the following tables.