Standard features
Simple everyday use
Begin scanning
(connection with satellite/ Antenna/Cable)
Press the INPUT button to enter All inputs menu,Press
to select TV mode or press the TV button
on the TV remote control to enter the TV mode,and
confirm your selection with OK button.
Connection with antenna or cable:
Connect the signal cable (e.g. the antenna cable) to
the antenna input (DVB-T27-C(Cable)) on the back
of the unit.
After connecting, switch on the unit.
Press the MENU key, select Settings, select Stations
and then Automatic Search.
Select Change settings, now select the desired
reception mode and press the OK key to confirm
the selection. Press the button to continue,
make the settings and perform the channel search.
Note on DVB-T:
Whether and how many channels can
be received depends on the location where the unit is
used and the availability of DVB-T transmitters in this
region.
DVB-T radio stations are only available in very few
regions.
Please note that when using DVB-T, a new channel
scan should be carried out each time you move to a
larger location.
Broadcast stations and their transmission frequency
vary from region to region.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
Supplement to DVB-T2:
This unit is suitable for the reception of DVB-T2
transmitters in Germany.
Make sure that DVB-T2 is available in your region.
If you have any questions, please contact our support.
Note that you may now need a CAM module for
DVB-T2 to receive it.
Attention!
The CAM module already has the corresponding
functions of a smart card integrated.
In Germany, you therefore only need the CAM
module.
Connecting a satellite receiver:
Connect the signal cable to the DVB-S After connecting,
switch on the unit.
Press the MENU button, select Settings, select Channels
and then Automatic Search.
Select Change settings and now select Satellite.
Press the button to continue, make the settings and perform
the channel search.
Standard features
31
Need help?
Do you have a question about the H236V6D and is the answer not in the manual?