Bush H236V6D Instruction Manual page 30

Standard features
Simple everyday use
How to navigate menus - Selecting
source
1. Press the INPUT button on the remote control to
display the Input source list.
2. Press the
buttons to selec TV / HDMI 1 / HDMI 2

/ HDMI3 / DVD/Screen Sharing/ Content Sharing/
Connection Guide in the main menu,then press
the OK button option.
3. Press OK button to confirm your selection.
All Inputs
TV HDMI1
Screen Shar... Content Sh...
Electronic programme guide (EPG)
(DTV mode)
This system has an Electronic Programme Guide (EPG)
to help you navigate through all the possible viewing
options.
The EPG supplies information such as programme
listings, start and end times for all available services. In
addition, detailed information about the programme is
often available in the EPG (the availability and amount
of programme information will vary, depending on the
particular broadcaster).
This function can be used only when the EPG
information is broadcast by broadcasting companies.
The EPG displays the programme details for the next 7
days.
1. Press the GUIDE button to switch on EPG.
No programme
Friday 12 Jul 3:00 PM-6:00 PM
No programme information
All
3:00 PM
800 Neotion FTA 1
No programme
801 Natura SC
No programme
802 Neotion FTA 1 No programme
803 Moviz SC No programme
804 Neotion FTA 3 HD No programme
CH/P Page Up/Down On Demand
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
30
Standard features
Press to add input to home or rename input.
HDMI2 HDMI3 DVD
Connection...
Friday 12 Jul 3:21 PM
Movie Enterainment off
4:00 PM 5:00 PM
Settings Scheduled Programme Colour 24h-
2. Press GUIDE button or EXIT button again to switch o
EPG and return to normal TV viewing.
Info bar commands:
YELLOW (Prev. Day)
Press the YELLOW button to view the schedule of the
previous day.
BLUE (Next Day)
Press the BLUE button to view the schedule of the next
day.
Note: A USB storage device must be connected to one
of the USB inputs to use the PVR or REC functions.
OK
Press to display detailed information of the selected
programme (if available).
Press the buttons to adjust the settings then
select Save, and press OK button to confirm the settings.
Then / will be displayed as your reminders
shown. The TV will automatically tune to the selected
programme when it starts, and it will have a remind of
30s.
>
24h+