Using Your Nec Versa - NEC VERSA S1300 Series User Manual

Using your NEC VERSA

Removable Disk Drives
Optical Drive
An optical drive is a type of drive that uses laser light to read from and store data on optical
discs. Optical discs are commonly used to read, store, transfer or share data, especially for
media-rich content. Typically, your optical drive should be able to access most common optical
discs such as CDs and DVDs. The optical drive that comes with your notebook depends on the
notebook configurations you purchase.
• Emergency Eject Hole (A)
drive if the eject function is disabled by software or a power failure occurs. To remove a
disc, insert the end of a paper clip into the eject hole, and push in until you hear a click.
Manually open the drawer.
• Release Button (B)
CD into or remove a CD from the drive.
General Information about Optical Discs
Disc Loading
To insert a disc into the optical disc drive, follow these steps.
1. Press the Release button. The disc tray emerges a short way out of the drive door.
2. Gently pull the tray out until you can easily position a disc in the tray.
3. Put the disc, printed side up, into the circular impression in the tray.
4. Push the disc tray in until it clicks shut.
Note
Some discs vibrate when playing. This does not affect the optical disc drive.
- allows you to manually remove a disc from the CD-ROM
- ejects the disc tray. Press this button when power is on to insert a
44