NEC VERSA S1300 Series User Manual page 82

Power Supply and Cables
Depending on the model you purchased, some models may come with more than one type of
power cord.
Please note the following identifications to ensure that you are using the right power cord in
order to avoid electrical shock hazards.
WARNING
Failure to use the correct power cords may result in electrical shock.
Power Supply
The power supply socket-inlet and socket-outlet (if equipped) are classified as Hazardous
Voltage.
You must unplug the power supply cord to disconnect the equipment from the power supply.
For this purpose, the socket-outlet should be installed as close to the equipment as possible
and should be easily accessible.
In Europe, before plugging the power cord into an AC power outlet, check that the voltage
selector switch of the computer's power supply (if available) is in position "230 V". In the
U.S.A. and Canada, before plugging the power cord into an AC power outlet, check that the
voltage selector switch of the computer's power supply (if available) is in position "115 V". In
Asia, before plugging the power cord into an AC power outlet, check that the voltage selector
switch of the computer's power supply (if available) is in position "230 V".
Under no circumstances should the user attempt to disassemble the power supply. The power
supply has no user-replaceable parts. The power supply has hazardous voltages that can cause
serious personal injury.
A defective power supply must be immediately returned to your dealer.
This power cord plug is suitable for use in Malaysia,
Singapore, Hong Kong, Bangladesh and Maldives.
This power cord plug is suitable for use in Thailand and
Philippines.
This power cord plug is ONLY suitable for use in Indonesia,
Mongolia and most countries in Europe except
United Kingdom.
This power cord plug is suitable for use in Australia and
New Zealand. The live and neutral pins have insulation as
an extra safety precaution.
82