NEC POWERMATE P Manual page 12

Step 3
CAUTION
Before you connect or disconnect the power cord at the AC Port of your computer,
please ensure that the power plug is disconnected from the wall outlet.
Only use the power cable that comes with your computer. Although other power
cables may look similar, using them may damage your computer.
(i) Now, connect the power cable to the system unit.
(ii) Hold the cable cover over the cable head.
(iii) Push the cover down lightly until it is securely fastened over the cable head.
(i) Now, connect the power cable to the system unit.
(ii) There is a fastening hook located on the P6000 series back panel. This is for slotting in the
power cable so that it does not get tangled.
P4000 series
P6000 series
- 12 -