NEC POWERMATE P Manual page 7

Note
For information on the specification of your computer, please refer to the System
Configuration Label on the packaging box that comes with your system.
Setting Up and Booting Your Computer
The first thing you need to do is to set your computer up correctly, making sure that all the
essential devices and cables are properly connected.
Note
The P4000 series and P6000 series have different setups. For Step 1, please follow
the steps relevant to your system unit before proceeding to Step 2.
Step 1a (for P4000 series only)
The P4000 series system unit is shipped with a complete setup, with its stand already open
and a pre-installed hinge stopper. Place the system unit in its proper position.
CAUTION
Do not force the stand to close or it may
break due to its hinge stopper. If you want to
remove it, refer to the section on "Removing
the Hinge Stopper and Back Cover".
Step 1b (for P4000 series only)
Installing the Gadget Pocket (only available for P4000 series)
a. The gadget pocket has two slots on its back to allow for attachment on the back of the
system unit.
Front view
P4000 series
Back View
- 7 -