NEC POWERMATE P Manual page 17

b. Press and hold the connect button on the bottom of the wireless keyboard for at least
6 seconds until the wireless keyboard LED (on the upper right side of the wireless
keyboard) flashes once. Wait for 1 minute until the connection is established.
Synchronise the mouse with your system unit
c. Press and hold the connect button on the bottom of the wireless mouse for about 6
seconds until its LED is off, then release.
That's all! You should be able to properly use your wireless keyboard and wireless mouse
now. Changing batteries should not affect the ID-pairing, and you can operate your
wireless keyboard and wireless mouse from up to 10 metres away from the receiver.
Should either the wireless keyboard or wireless mouse fail to work, repeat the steps above
to repair the ID-pairing.
- 17 -