Supported Dimms - NEC POWERMATE NETPC System Administrator Manual

NOTE
10-ns or 12-ns, Synchronous Dynamic Random
Access Memory (SDRAM) DIMM can be installed
into the open memory socket.
Memory can be installed in one socket or both. The memory
type, size, and speed can vary between sockets. The system
automatically detects the memory; no jumper settings are
required. The DIMMS can be either single- or double-sided.
The minimum allowable memory size for the system is
8 MB, and the maximum is 256 MB.
The following table describes supported DIMM modules.
DIMM SIZE TYPE
8 MB CAS Latency 2 SDRAM
16 MB CAS Latency 2 SDRAM
32 MB CAS Latency 2 SDRAM
64 MB* CAS Latency 2 SDRAM
128 MB* CAS Latency 2 SDRAM
*64-MB and 128-MB modules are supported when available.
3-4 Reviewing System Features
An additional approved vendor list (AVL),

Supported DIMMs

CONFIGURATION
1 M x 64
2 M x 64
4 M x 64
8 M x 64
16 M x 64
TECHNOLOGY
16 Mbit
16 Mbit
16 Mbit
16 Mbit
64 Mbit