NEC POWERMATE NETPC System Administrator Manual page 33

T
Maximum Capacity
This read-only field displays the capacity of the hard
disk drive installed in the system.
T
Multiple Sector Transfers
Enter the number of sectors transferred per block.
Choices include "Disabled" (no sectors chosen),
"Standard" (one sector), 2, 4, 8, and 16 sectors.
T
LBA Mode Control
When "Enabled" is selected, it causes logical block
addressing to be used in place of cylinders, heads, and
sectors.
T
Transfer Mode
Enter the method for transferring the data between the
hard disk drive and the system memory. The Setup menu
only lists those options supported by the drive. Choices
can include
Standard
Fast PIO 1, Fast PIO 2, Fast PIO 3, or Fast PIO 4
FPIO3 and Bus Mastering
FPIO 4 and Bus Mastering.
T
Ultra DMA Mode
This field sets the Ultra DMA mode, which allows a
faster read/write file transfer rate (33 MB per second).
Choices include Mode 0, Mode 1, and Mode 2. This
setting should be disabled if an older hard disk drive is
installed that is not supported by Ultra DMA mode.
Using NECCSD Utilities 2-9