Table of Contents
Advertisement
The NEC SNMP Agent and the NEC WebTelligent software are each
installed using a Setup.exe program launched from a subdirectory on the
NEC Application and Driver CD. You can install these applications
without regard to the order in which other applications are installed.
Note
Install the NEC SNMP Agent software from the NEC Application
and Driver CD or download the software from the NEC CSD website
(www.nec-computers.com).
1.
If you are installing the NEC SNMP Agent from the NEC
Application and Driver CD, see "Installing ToolTelligent Utilities"
for installation instructions.
If you are downloading the software from the NEC CSD website
2.
(www.nec-computers.com), save the download file in your
C:\Temp directory or other appropriate directory. Double click
setup.exe and follow the prompts.
Configuring the NEC SNMP Agent for Windows 98 or
Windows 2000
The SNMP Agent is configured with the Windows Policy Editor. The
Policy Editor configures the traps, communities, and other policies.
Use the Policy Editor to configure the traps, communities, and other
policies as follows.
In the Windows taskbar, click Start, and point to Programs,
1.
Accessories, and System Tools. Click System Policy Editor.
At the "System Policy Editor," click File and point to Open
2.
Registry. Double click Local Computer.
3.
Expand Network and expand SNMP to display the following list of
policies.
Communities — Specifies one or more groups of hosts that this
!
computer belongs to and that can be managed with SNMP.
Permitted Managers — Limits the set of SNMP management
!
applications that can access this computer to those with the IP or
IPX addresses that the user provides.
4-20 Managing System Resources
Advertisement
Table of Contents
