Table of Contents
Advertisement
3.
Locate jumper 7F4 (see the following figure).
Remove the jumper from pins 1 and 2 to clear your password.
4.
5.
Place the jumper back on pins 1 and 2.
6.
Replace the access panel, plug in the AC power adapter, and power
up the system.
At the startup screen, press F2 to open the BIOS Setup utility.
7.
Navigate to the Security Menu and set your new password (see
Chapter 3, "Configuring the System" for details on setting a
password).
Locating the password clear jumper
A – Password Clear Jumper 7F4
3-38 Configuring the System
Advertisement
Table of Contents
