Table of Contents
Advertisement
Exit Menu
Choose the Exit menu by selecting Exit in the legend bar on the Main
menu screen. Other Exit menu options are available by selecting
submenus.
Use the arrow keys to select one of the Exit menu options and press
Enter to select a submenu. Explanations of each Exit menu item are in
the following table.
Menu Item
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
FLASH Utility
The system BIOS resides on a flash read only memory (ROM) chip in
your system. The flash ROM can be updated using the following
procedure. Before starting the BIOS update, NEC recommends that you
first contact NEC CSD for assistance (see Chapter 7 for contact
information).
Update the Flash ROM with a BIOS flash diskette. The diskette contains
the latest version of the BIOS code. You can get the diskette from NEC
CSD or download the BIOS from the NEC CSD website or Bulletin
Board System (BBS). See Chapter 7 for download, website, and bulletin
board system information.
Update the BIOS from the BIOS flash diskette as follows.
1.
Write down the BIOS Setup parameters currently set on your system.
3-24 Configuring the System
Exit Menu Items
Settings (default is bold)
Implements the changes just made, and
exits BIOS.
Exit leaving BIOS unchanged.
Loads default values for all BIOS setup
fields.
Load previous values from BIOS for all
setup fields.
Saves all setup value changes to BIOS.
Advertisement
Table of Contents
