CareCo Abilize Cobas User Manual page 29

TROUBLESHOOTING
The powerchair features an automatic fault warning function.
If there is an internal issue with the powerchair, the joystick LED's will flash, and the horn
will sound.
FLASH CODE POSSIBLE CAUSE
The joystick and/or its associated wir-
1
ing has a fault.
2 Power/Configuration error.
The LHS motor and/or its associated
3
wiring has a fault.
The RHS motor and/or its associated
4
wiring has a fault.
The LHS brake is in [FREEWHEEL]
mode.
5
The LHS brake and/or its associated
wiring has a fault.
The RHS brake is in [FREEWHEEL]
mode.
6
The RHS brake and/or its associated
wiring has a fault.
The controller and/or its associated
7
wiring has a fault.
POSSIBLE REMEDY
1. Switch [OFF] the powerchair.
2. Disconnect, then reconnect the
joystick power cable.
3. Switch [ON] the powerchair.
Contact CareCo.
Charge the powerchair for 6-8
hours.
Contact CareCo.
Contact CareCo.
Contact CareCo.
1. Switch [OFF] the powerchair.
2. Push the LHS brake lever
downwards to engage [DRIVE]
mode.
3. Switch [ON] the powerchair.
Contact CareCo.
1. Switch [OFF] the powerchair.
2. Push the RHS brake lever
downwards to engage
[DRIVE] mode.
3. Switch [ON] the powerchair.
Contact CareCo.
Contact CareCo.
29