The CareCo Airglide folds up for ease of transportation and storage. Specification Wheelchair Dimensions: 60cm (16”) 65cm (18”) (Width) x 103cm (Length) x 95cm (Height) Seat Dimensions: 40.5cm (16”) 46cm (18”)
Page 4
Assembly The CareCo Airglide Wheelchair will come fully assembled with the exception of the legrests. Simply take the wheelchair out of its packaging and pull the armrests apart, then push the seat base down until in the horizontal position. The legrests then clip into the two fixings part...
Page 5
Pull this lever. WARNING Do not push down on the handles to raise the front of the wheel- chair as this could result in damage to your Airglide Wheelchair. Use the stepper tube as described further on in this manual.
The attendant/carer then pushes the wheelchair forward and gently lowers the rear castors to the ground. Operation • The Airglide Wheelchair can be propelled by the wheelchair user using the rear wheel handrims or by an attendant/carer using the...
• Do not use on gradients larger than 10 degrees. • The Airglide Wheelchair is only suitable for a single user. • Ensure feet are on footplates during operation. • Do not stand on the footplates.
Page 8
least once a week. • If exposed to moisture, dry immediately. • Polish metal parts of the chair with auto wax once a month. • Clean the seat upholstery with a mild soap solution, rinse and wipe dry. • Worn or torn upholstery should be replaced promptly.
The warranty does not extend to non-durable parts, such as rubber accessories, castors, grips and arm pads, which are subject to normal wear and tear and require periodic replacement. If you have any queries please contact CareCo. CareCo, Hubert Road, Brentwood, Essex CM14 4JE www.careco.co.uk...
Need help?
Do you have a question about the Airglide and is the answer not in the manual?
Questions and answers