Today Screen - NEC MOBILEPRO P300 Manual

Today Screen

The Today screen normally appears whenever you power up the MobilePro. On the Today
screen, you can see at a glance your important information for the day. The following figure
shows a typical Today screen and what you can do from it.
At the top of the screen is the Start bar. The bar displays the current time and any active
program. The bar also allows you to switch to programs and close screens.
From the Today screen, you can select any of the listed activities by tapping on your selection
with the stylus. For example, if you just activated your MobilePro, you might want to enter your
name as the owner. Do this as follows.
At the Today screen, tap
1.
At the Owner Information screen, tap the keyboard icon at the lower right of the screen. The
2.
keyboard is displayed.
Tap once in the Name field. A blinking cursor appears, indicating that you can enter data.
3.
Use the keyboard to tap in your name, just as you would with your computer keyboard.
4.
If you make a mistake and need to remove a letter(s) or remove a word(s), you can
5.
correct minor mistakes by placing the cursor after the letter or letters to be deleted and
!
pressing the backspace arrow on the keyboard to delete the letter or letters.
highlight a whole word(s) with the stylus and pressing and holding the stylus on the
!
word(s). A pop-up menu gives options to Undo, Cut, Copy, Paste, Clear, or Select All.
When done, click
6.
name as the owner.
At the bottom of the Today screen is the Command Bar. Tapping
tasks that you can tap to open. Use this as a short cut to open any of the listed tasks.
By using the stylus and several control buttons, you can open tasks from the Today screen and
Navigation Bar and enter or read data at selected screens.
Typical Today Screen
Tap here to set owner information
. Your changes are saved and the Today screen is displayed with your
OK
.
on the bar lists several
New
Get Started 1-13