Lcd Cover Features; Charge The Battery - NEC MOBILEPRO P300 Manual

LCD Cover Features

The LCD cover is a hinged plastic cover that fits over the touch screen on your MobilePro. A
magnet at the bottom of the MobilePro holds the cover in place. The cover can be folded over
the back for clear access to the touch screen.
The cover can be removed from the MobilePro by pressing in on the two round pins on the
cover hinge and removing the cover from the MobilePro. Reinstall the cover by aligning it with
the top of the MobilePro, pressing in on the round pins, and inserting the hinge catches in the
slots.

Charge the Battery

Your MobilePro P300 contains a rechargeable Lithium Ion battery. The battery must be charged
before you use the MobilePro the first time and periodically recharged thereafter. As the battery
is rechargeable, you do not need to constantly replace batteries.
Battery power is monitored by your MobilePro P300. Warning messages and battery low icons
display when battery power becomes low. If you receive a battery low warning message, you
should save your data and recharge the battery as soon as possible to avoid data loss.
You can also monitor battery power activity through the power remaining indicator on your
MobilePro. Press or tap the My Menu button to see the indicator. Or tap
the tab, and tap
System
Use the MobilePro cradle and AC adapter to charge the battery. You can also directly charge the
MobilePro using the AC adapter.
Note
Before using your MobilePro for the first time, you need to charge the battery. Do not
use the MobilePro until the battery is fully charged, as indicated by the steady green battery
charging LED and the power remaining indicator.
1-10 Get Started
Removing the Cover
A – Slot (1 of 2)
B – Catch (1 of 2)
.
Power
C – Cover Hinge
Start
, tap , tap
Settings