Create An Ethernet Connection To A Network - NEC MOBILEPRO P300 Manual

Install an optional modem card.
2.
Tap
3.
settings, select Internet Settings and tap
In the Modem tab, tap
4.
Enter a name for the connection, such as "Company Connection."
5.
In the Select a Modem list, select your modem type. If your modem type does not appear,
6.
try reinstalling the modem card. If you are using an external modem that is connected to
your MobilePro with a cable, select Hayes Compatible on COM1.
You should not need to change any settings in Advanced. Most servers now use a
7.
dynamically-assigned address. If the server you are connecting to does not use a
dynamically-assigned address, tap
When finished, tap
Enter the access phone number, and tap
8.
Select other desired options, and tap
9.
In the Dialing Locations tab, specify your current location and phone type (most phone lines
10.
are tone). These settings apply to all connections you create.
To start the connection, use one of the following programs. Your MobilePro automatically
begins connecting. Once connected, you can:
Send and receive e-mail messages by using Inbox. Before you can use Inbox, you need to
!
provide the information it needs to communicate with the e-mail server. For specific
instructions, see "Connect Directly to an E-mail Server," later in this chapter.
Visit Internet or intranet Web or WAP pages by using Pocket Internet Explorer.
!
Send and receive instant messages with MSN Messenger. For more information, see "MSN
!
Messenger" in Chapter 5.
Synchronize. For more information, see ActiveSync Help on the desktop computer.
!

Create an Ethernet Connection to a Network

Create an Ethernet connection to a network as follows.
You do not need to create a new connection on your MobilePro. You need an optional
1.
Ethernet card and PC Card expansion jacket for your MobilePro.
Get a user name, password, and domain name from your network administrator.
2.
Install the Ethernet card on your MobilePro. For instructions on installing and using the
3.
Ethernet card, see the owner's manual for the card.
The first time you install the card, Network Settings appears automatically so that you can
4.
configure the Ethernet card. Most networks use DHCP, so you should not have to change
these settings unless your network administrator instructs you to do so. Tap
not appear or to change settings later, tap
Network
Connect the Ethernet card to the network with a network cable. For information, see the
5.
owner's manual for the card.
Tap , tap
6.
network card connects to list, select
and tap . In the Connections tab, tap
Settings
.
New
and tap
OK Next
, tap the adapter you want to change, and tap
, tap the Connections tab, and tap
Settings
Connections
.
Modify
tap the TCP/IP tab, and enter the address.
Advanced,
.
.
Next
.
Finish
and tap
Settings
Properties
Connections
.
Work
. Under The Internet
. (If it does
OK
. On the Connections tab, tap
.)
. From the My
Get Connected 6-5