Using The Secure Data Card; Accessing Mobilepro Functions - NEC MOBILEPRO P300 - QUICK GUIDE 2001 Quick Manual

Using the Secure Data Card

The Secure Data (SD) card included with your MobilePro contains
several productivity and mobility applications that you can install on your
MobilePro (see "Installing Productivity, Mobility, and Entertainment
Applications" at the end of this guide). You can also load the applications
from your Companion CD.
To install the SD card and any of its applications, use the following
procedure.
Connect your MobilePro to the cradle and the AC adapter to the
1.
cradle and AC power.
Power on the MobilePro.
2.
3. Install the SD card in the SD slot on the side of your MobilePro. A
menu displays on the MobilePro, showing you the contents of the
card.
Select an application and follow the prompts to install it on your
4.
MobilePro.
5. When finished, remove the SD card and store it in a static free bag, or
use it to store data or programs.

Accessing MobilePro Functions

The following table is a guide to many of the functions and settings for
the MobilePro. Included in the table is the tapping path for accessing the
function from the Navigation Bar. Note that not all functions are listed
and some settings and selections may differ from that on your MobilePro.
You can also access many of these functions from the My Menu screen.
Press or tap the My Menu button on the front of the MobilePro, tap the
triangle at the bottom right of the screen to open a pop-up menu list, and
tap a selection (Top, Application, Data, Settings-Personal,
Settings-System, and Settings-Connections). At the selected screen, tap
the function.
26 Getting Started Guide