Table of Contents
Advertisement
Calibrating and Activating the MobilePro
It is essential that you calibrate and activate your MobilePro before you
use it. This ensures accurate positioning when entering text and selecting
menus. Calibrate and activate the MobilePro as follows.
1.
Press the power button to power on the MobilePro.
2.
Tap the touch screen with the stylus to start the calibration and
activation.
At the prompt to align the screen, tap the center of the cross wherever
3.
the traveling cross stops on the screen. You might have to do this
several times to properly calibrate.
4.
On completion of the screen calibration, follow the screen prompts to
complete the activation.
T
At the Stylus screen, tap
T
At the "pop-up menus" screens, perform the indicated
operations.
T
At the Congratulations screen, tap
T
At the "location" screen, select your time zone and tap
continue.
T
At the "completion" screen, tap the screen to continue.
T
The Today screen is displayed.
Note
You can also recalibrate the MobilePro at any time after the initial
calibration. Tap Start , tap Settings , tap the System tab, and tap Screen .
Your MobilePro is now ready to use. The following sections describe the
MobilePro's three basic screens and how to use them for performing
functions. Also included is information for installing ActiveSync on your
computer.
to continue.
Next
to continue.
Next
Getting Started Guide 15
Next
to
Advertisement
Table of Contents
