NEC MOBILEPRO P300 - QUICK GUIDE 2001 Quick Manual page 27

Your first synchronization begins when the installation is completed. This
takes time, as the process is copying information to the MobilePro.
On completion of synchronization, you can either remove the MobilePro
from the cradle or leave it in with AC power connected.
Press the power button on the MobilePro and check your Calendar. To
check, tap the Calendar program button, tap the Calendar icon on the
Today screen, or tap and tap
information in Microsoft Outlook on your computer was copied to your
MobilePro. Also look at Contacts and Tasks. If you have Contacts and
Tasks information on your computer, you should see that information
copied to your MobilePro.
When done, tap the X button at the top right of the screen to exit the
program.
For further information on using MobilePro ActiveSync, tap
Today screen and tap
Help
screen, tap Connections and tap
Start and Stop Synchronization
information in the NEC MobilePro P300 Reference Guide on your
Companion CD.
For information about using ActiveSync on your computer, start
ActiveSync on your computer and click
Once you have installed ActiveSync on your computer and performed
your first synchronization, synchronization occurs whenever the
ActiveSync components on the MobilePro and on your computer are
activated.
Use the USB PC connect cable for synchronization. You can also use
infrared or an optional serial cable for synchronization. Set the
synchronization type on the MobilePro by tapping
ActiveSync , tapping Tools,
then USB Sync .
(calendar). Note that your calendar
at the Navigation Bar screen. At the Help
Set Up Remote Synchronization
. You can also find ActiveSync
ActiveSync Help
Start
tapping Connect via IR,
Getting Started Guide 25
at the
or tap
.
, tapping
or tapping Options