Advertisement
MobilePro Users Guide
Step 2
Make sure the power on the MobilePro HPC is turned off. Rotate the cover for the serial
port to the direction of the arrow, then lock it at the bottom.
Locate the serial port on your MobilePro HPC and gently slide it into the cradle until the
port on the unit and the connector on the cradle lock.
CAUTION
Be certain to turn off the MobilePro HPC before connecting to the cradle.
l
ALWAYS slide the unit into and out of the cradle. DO NOT ATTEMPT TO LIFT IT
l
OUT. Doing so, may damage the unit and the cradle connection.
http://kbase/mobilpro/400/docs/mprouser.htm
Page 33 of 35
10/20/98
Advertisement
