Advertisement
MobilePro Users Guide
Step 1
Turn the MobilePro HPC off.
Step 2
Have a new backup battery available (Lithium, CR 2032).
Step 3
Slide the battery lock switch on the bottom of the unit to the SUB_BATT position.
Pull the sub-battery compartment cover in the direction of the arrow as seen bellow using
the stylus. When the cover is removed, use the stylus to help remove the sub battery from
its compartment.
Step 4
Insert the new sub battery (CR2032) with the plus (+) mark facing up. See below.
Step 5
Replace the sub battery cover and slide the lock switch to the LOCK position.
CAUTION
http://kbase/mobilpro/400/docs/mprouser.htm
Page 29 of 35
10/20/98
Advertisement
