Advertisement
Quick Links
Advertisement
Related Manuals for FLIR VS80
Summary of Contents for FLIR VS80
- Page 1 User Manual VS80 Dual HD Camera Probe MODEL VS80C2HD-49–3RM...
-
Page 2: Product Descriptions
Introduction This probe is designed for use with the VS80 High Performance Videoscope. The probe is controlled by the touch-screen icons and control buttons on the VS80. The VS80 user manual and additional translations of this probe manual are available from the support site (see the Support section). - Page 3 1. Align the white dot on the probe connector with the white dot on the monitor connector. 2. Plug the probe into the monitor unit, ensuring proper alignment and full insertion. 3. Tighten the collar nut to secure the connection. Do not overtighten.
-
Page 4: Specifications
0.86 in. (21.8 mm) Probe length 9.8 ft. (3 m) Side-view camera LED Worklights Worklights are controlled from the VS80. Five (5) forward and one (1) side worklight Operating temperature 32 to 140℉ (0 to 60℃) Storage temperature –4 to 140℉ (-20 to 60℃) -
Page 5: Warranty And Support
Warranty and Support Limited 3–Year Warranty This product is protected by FLIR’s Limited 3-Year Warranty. Visit www.flir.com/testwarranty to read the warranty document. CUSTOMER SUPPORT Customer Support Telephone List https://support.flir.com/contact Repair, Calibration, and Technical Support https://support.flir.com #NAS100222; r. AA/98795/100443; en-US... - Page 6 #NAS100222; r. AA/98795/100443; en-US...
- Page 8 Customer support http://support.flir.com Copyright © 2024, FLIR Systems, Inc. All rights reserved worldwide. Disclaimer Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions.
Need help?
Do you have a question about the VS80 and is the answer not in the manual?
Questions and answers