Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FLIR Extech Instruments 40180
Summary of Contents for FLIR Extech Instruments 40180
- Page 1 User's Guide Tone Generator and Amplifier Probe Model 40180...
- Page 2 Introduction Congratulations on your purchase of Extech’s Model 40180. This tone generator and amplifier probe set is used to quickly trace and identify cables or wires within a group and also check the operation of phone lines. With proper use and care, this meter will provide many years of reliable service. Meter Description Power switch Modular connectors...
- Page 3 Operating Instructions Note: Remember to turn off the tone generator after tracing the cables Cable/Wire tracing CAUTION: Do not connect the tone generator in the TONE position to any wire or cable with an active circuit of more than 24VAC. Connect the tone generator to the cable For cables terminated at one end, connect the red alligator clip to a wire and the black alligator clip to equipment ground...
- Page 4 Generator: 63.5 x 63.5 x 38.1mm (2.5 x 2.5 x 1.5”) Weight 272g (0.6lb) Copyright © 2012 Extech Instruments Corporation (a FLIR company) All rights reserved including the right of reproduction in whole or in part in any form. www.extech.com...
Need help?
Do you have a question about the Extech Instruments 40180 and is the answer not in the manual?
Questions and answers