Related Manuals for Draper 75442
Summary of Contents for Draper 75442
- Page 1 Original Instructions Version 3 - September 2024 3-IN-1 WET & DRY VACUUM CLEANER WITH SHAMPOO VALETING 75442...
-
Page 2: Preface
All photographs and drawings within this manual are document is part of the product; retain it for the life supplied by Draper Tools to help illustrate correct of the product, passing it on to subsequent holders. operation of the product. -
Page 3: Table Of Contents
2. Contents 1. Preface 10. Shampoo Function 13-15 1.1 Product Reference 10.1 Attaching the Shampoo Delivery Hose 1.2 Revisions 10.2 Filling the Shampoo Tank 1.3 Understanding the Safety Content of This 10.3 Connecting Shampoo Inlet Hose & Filter 14 Manual 10.4 Attaching Large Fluid Nozzle 1.4 Copyright © Notice 10.5 Attaching the Small Fluid Nozzle 2. -
Page 4: Product Introduction
Ideal for use in home, workshop, office operate or maintain the product, and retain it for later use. and garage environments and ideal for car valeting. Any other application beyond the conditions established for use will be considered misuse. Draper Tools accepts 3.2 Specification Stock No. 75442 Part No. -
Page 5: Health And Safety Information
If the power supply cord is damaged, it must be replaced dropped in water, get it checked and repaired by a by Draper Tools, an authorised service agent or similarly qualified person. qualified personnel in order to avoid a hazard. -
Page 6: Residual Risk
4. Health and Safety Information 4.4 Residual Risk If an extension lead is required, use an approved and compatible lead rated for this appliance. The safety instructions in this manual cannot account for all Follow all the instructions supplied with the extension lead. possible conditions and situations that may occur. -
Page 7: Identification And Unpacking
6. Identification and Unpacking 6.1 Product Overview (12) (13) (14) (18) (10) (16) (11) (19) (20) (17) (22) (15) (24) (23) (25) (21) Tank. (14) Handle fixing knob x 2. Shampoo delivery socket. (15) Castors x 2. Vacuum port. (16) Rear wheels x 2. Main vacuum/shampoo selection buttons. -
Page 8: What's In The Box
If any part is damaged or missing, do not attempt to examine it for any signs of damage that may have occurred use the product. Please contact the Draper Helpline; during shipment. Before assembling the product, lay the contact details can be found at the back of this manual. -
Page 9: Assembly Instructions
7. Assembly Instructions Important: Before preparing or adjusting this product, (14) read and understand all the safety instructions listed in this manual. Ensure that the vacuum cleaner is unplugged from the power supply before assembling. (13.3) (13.2) 7.1 Fitting the Push Handle (13.1) (Fig.1 &... -
Page 10: Fitting And Replacing The Remote Control Handle Battery
7. Assembly Instructions 7.4 Fitting and Replacing the Remote Control Handle Battery (Fig. 5 & Fig. 6) 1 X 23A (12V) alkaline battery required (not supplied). (18.3) ① 1. To fit or replace the battery, push the release catch (18.3) using a screwdriver. 2. -
Page 11: Setting Up The Vacuum Cleaner
8. Setting Up the Vacuum Cleaner Important: Ensure the vacuum cleaner is unplugged (18.1) (18.2) from the power outlet before assembling. 8.1 Setting Up (Fig. 7 & Fig. 8) 1. Release the tank catches (6) and lift off the motor housing. -
Page 12: Operating Instructions
9. Operating Instructions Important: Before operating this product, read and understand all the safety instructions listed in this manual. Ensure that the product is fully assembled and correctly prepared for use. (27.2) • DO NOT operate the vacuum cleaner without the correct filter fitted. -
Page 13: Shampoo Function
9. Operating Instructions Important: • Large Fluid Nozzle (23) - Fit the large fluid nozzle to nozzle completely in the liquid to allow for adequate the retractable extension tube (19) for use on floors air flow. and other flat surfaces to pick up water dispersed over • The vacuum is fitted with a float regulator that will a large area. -
Page 14: Filling The Shampoo Tank
10. Shampoo Function 10.2 Filling the Shampoo Tank (Fig. 18) 1. Fill the shampoo tank (11) with as much correctly diluted anti-foam shampoo as required. Always follow the shampoo manufacturer’s ratio instructions. − The shampoo tank has a capacity of ... -
Page 15: Attaching The Small Fluid Nozzle
10. Shampoo Function 4. Connect the other screw fitting end of the delivery hose (23.4) to the shampoo/vacuum control handle grip. (23.4) (20.2) Fig. 22 NOTES: (Fig. 23) HARD FLOORS CARPETS • Fit the rubber sleeve (23.2) to the large nozzle (23) when cleaning hard floors. -
Page 16: Maintenance And Troubleshooting
• If the plug or power supply cord is damaged it must, • Clean the cartridge filter regularly with a soft brush. for safety reason be replaced by Draper tools, an • Regularly clean the foam filter using a mild soap & water. -
Page 17: Troubleshooting
Check unit plugged in and power supply is working correctly. Faulty power cord. Unplug and examine power cord. If damaged, contact the Draper Tools helpline for assistance. Switch not in the on ‘I’ position. Move the switch to the ‘I ’ position. -
Page 18: Spares, Returns And Disposal
Draper Tools Product Helpline for details of your nearest authorised agent. Draper Tools will endeavour to hold any spare parts, if applicable, for seven years from the date that it sells the final matching stock item. -
Page 19: Warranty
If, upon inspection, it is found that the fault occurring is due to defective materials or workmanship, repairs will Your Draper Tools guarantee is not effective until you can be carried out free of charge. This warranty period covers produce, upon request, a dated receipt or invoice to parts and labour for 12 months from the date of verify your purchase within the guarantee period. -
Page 20: Contact Details
Product Helpline: +44 (0) 23 8049 4344 Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited © Published by Draper Tools Limited...
Need help?
Do you have a question about the 75442 and is the answer not in the manual?
Questions and answers