Table of Contents
Advertisement
DUST EXTRACTORS
PART No. DE1030.
DE1030H
DE1045
DE2000
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO
ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the
machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct
and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to
the machine, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure
both machine and operator safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous
improvement determines the right to make modifications without prior warning.
GENERAL INFORMATION
STOCK No. 37802
37804
37129
37130
05/2001
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper DE1030
Summary of Contents for Draper DE1030
-
Page 1: General Information
05/2001 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to... -
Page 2: Table Of Contents
Maintenance..........................Optional Accessories ........................DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Part Number:- DE1030, DE1045, DE2000 & DE1030H Stock No. 37802, 37129, 37130 & 37804. -
Page 3: Specification/Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 5: Safety Warning/General Safety Instructions For Machine Tools
Please read the following instructions carefully, failure to do so could lead to serious personal injury. IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 6: Getting To Know Your Dust Extractor
GETTING TO KNOW YOUR DUST EXTRACTOR DE1030, ✗✌ DE1045 ✘✌ & DE103H ✙✌ ✖✌ ✕✌ ✚✌ ✛✌ 1 - Transportation Handles 5 - Motor On/Off Switch 2 - Locking Motor/Lid Clips 6 - Receptacle Connector 3 - Motor Housing Handle... -
Page 7: Operating Instructions
OPERATION DE1030, DE1045 & DE1030H:- Fig.1. Fit the required hose to the dust extractor. Slide the hose connector ✪✌ into the receptacle connector ✫✌ Fig.1. ✫✌ ✪✌ Connect the dust extractor to the power supply. To Fig.2. operate, push switch ✬✌ Fig.2. to the ON position. -
Page 8: Maintenance
All repairs/adjustments should be carried out by a qualified person. IMPORTANT DE1030H This hazardous dust extractor will not be repaired/handled by Draper Tools or by their warranty agents until the machine has been cleaned and certified by a decontamination organisation. -
Page 9: Optional Accessories
OPTIONAL ACCESSORIES DRAPER STOCK PART No. No. DESCRIPTION ADE1 37456 4" CLEAR HOSE & CLIP ADE2 37457 4" to 2 ⁄ " ADAPTOR ADE3 37458 ⁄ " INDUSTRIAL HOSE ADE4 37459 ⁄ " HEAVY DUTY HOSE ADE5 37460 ⁄ " METAL HOSE CONNECTOR... - Page 10 NOTES - 9 -...
- Page 11 NOTES - 10 -...
- Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the DE1030 and is the answer not in the manual?
Questions and answers