| Initial Configuration
C
4
HAPTER
Setup Wizard
S
4 - W
TEP
IRELESS
S
ECURITY
Operation Mode — Enables and configures the keep alive time.
◆
Primary DNS Server — The IP address of the Primary Domain Name
◆
Server. A DNS maps numerical IP addresses to domain names and can
be used to identify network hosts by familiar names instead of the IP
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
Secondary DNS Server — The IP address of the Secondary Domain
◆
Name Server.
MAC Clone — Some ISPs limit Internet connections to a specified MAC
◆
address of one PC. This setting allows you to manually change the MAC
address of the Wireless Broadband Router's WAN interface to match the
PC's MAC address provided to your ISP for registration. You can enter
the registered MAC address manually by typing it in the boxes
provided. Otherwise, connect only the PC with the registered MAC
address to the Wireless Broadband Router, then click the "Clone your
PC's MAC Address" (Default: Disable)
The Step 4 page of the Wizard configures the wireless network name and
security options.
Figure 19: Wizard Step 4 - Wireless Security
The following items are displayed on this page:
Network Name (SSID) — The name of the wireless network service
◆
provided by the Wireless Broadband Router. Clients that want to
connect to the network must set their SSID to the same as that of the
Wireless Broadband Router. (Default: "SMCWBR14S-N4_AP"; Range: 1-
32 characters)
– 46 –