SMC Networks Barricade SMC7904BRA Manual page 76

C
ONFIGURING THE
Parameter
IP Address Pool
Start IP (Address)
End IP (Address)
Domain Name
Note: Remember to configure your client PCs for dynamic address
allocation. (See page 3-2 for details.)
4-30
B ADSL R
ARRICADE
Description
Specify the start IP address of the DHCP pool. Do not
include the gateway address of the Barricade ADSL Router
in the client address pool. If you change the pool range,
make sure the first three octets match the gateway's IP
address, i.e., 192.168.2.xxx.
Specify the end IP address of the DHCP pool.
If your network uses a domain name, enter it here.
Otherwise, leave this field blank.
OUTER