Rear Panel - SMC Networks 7901BRA4 - annexe 1 Manual

The following table describes the LEDs of the device.
LED Status
On
Off
Power
On
Blinks
On
Link
Blinks
Off
On
Data
Blinks
Off
On
Ethernet
Blinks
Off

Rear panel

The following table describes the interfaces of the device.
Interface
Line
Ethernet
Reset
Power
SMC7901BRA4 User Manual
Color
The device is powered on and the initialization is normal.
Green
The device is powered off.
The device is initializing.
Red
The firmware is upgrading.
Initial self-test of the device is normal and ready.
Blue
The device is detecting itself.
Initial self-test of the device is failed.
The Internet connection is established.
Green
Data is being transmitted on the Internet.
The Internet connection is failed.
The LAN connection is established and active.
Green
Data is being transmitted through the Ethernet interface.
The LAN connection is failed.
RJ-11 interface, for connecting to the ADSL interface or a splitter through the telephone
cable.
RJ-45 interface, for connecting to the Ethernet interface of the PC or the Ethenet devices
with the cable.
Resets to the factory defaults. To restore factory defaults, keep the device powered on and
push a paper clip into the hole. Press down the button over 5 seconds, then release.
Power interface, for connecting to the power adapter of 10V DC, 600 mA.
Power on or power off the device.
Description
Function
2