The Rear Panel - SMC Networks WBR14-G3 User Manual

2.3.2 The Rear Panel

The rear panel contains the following:
Power Input: Only use the power adapter supplied with the SMCWBR14-G3
54Mbps Wireless Router. Using a different adapter may result in the product being
damaged.
Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PCs
One RJ45 WAN port for connecting the router to a Cable modem, DSL modem, or
Ethernet
Reset button. There are two ways to reset the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults
page in the router's Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the router's power.
Second, press and hold the default reset button then turn on the router's
power, until the SYS LED lights up (about 3 seconds). Last, release the
reset button and wait for the router to reboot.
Note: Ensure the router is powered on before it restarts completely.
Wireless antenna
Figure 2-2: Rear Panel Image
- 5 -
SMCWBR14-G3 User Guide