Table of Contents
Advertisement
The following table describes the parameters and buttons in this page.
Field
Country
Internet Service Provider
Protocol
Connection Type
VPI
VCI
Take VPI/VCI of 0/35 for example. Before you configure the protocol, you must select the country in which you
are in and your ISP.
1483 Bridged
If the uplink equipment supports the 1483 Bridged protocol, you can set the device to initiate the bridge dialup.
SMC7901BRA4 User Manual
Select the country in which you are in.
Select your ISP.
Select the protocol. You can choose 1483 Bridged, 1483 MER: DHCP, 1483
MER: Staic IP, PPPoE, PPPoA, or 1483 Routed.
Select the connection type provided by your ISP from the drop-down list box.
You can choose LLC or VC-Mux.
The virtual path between two points in an ATM network, and its valid value is
from 0 to 255.
The virtual channel between two points in an ATM network, ranging from 32 to
65535 (0 to 31 is reserved for local management of ATM traffic).
9
Description
Advertisement
Table of Contents
