Rear Panel - SMC Networks 7904WBRA4 - annexe 1 Manual

The following table describes the LEDs of the device.
LED
On
Off
Power
On
Blinks
On
Link Blinks
Off
On
WLAN Blinks
Off
On
LAN4/LAN3/LAN2
Blinks
/LAN1
Off

Rear panel

The following table describes the interfaces of the device.
Interface
Power switch, power on or power off the device.
Resets to the factory defaults. To restore factory defaults, keep the device powered on and
Reset
push a paper clip into the hole. Press down the button over 5 seconds, then release.
Power Power interface, for connecting to the power adapter of 12 V DC, 1 A.
LAN1/LAN2/LAN3 RJ-45 interface, for connecting to the Ethernet interface of the PC or the Ethenet devices with
/LAN4 the cable.
RJ-11 interface, for connecting to the ADSL interface or a splitter through the telephone
Line
cable.
Status Color
The device is powered on and the initialization is normal.
Green
The device is powered off.
The device is initializing.
Red
The firmware is upgrading.
The Internet connection is normal.
Blue Data is being transmitted on the Internet.
The Internet connection is failed.
The WLAN connection is established.
Green Data is being transmitted through the WLAN interface.
The WLAN connection is failed.
The LAN connection is normal and active.
Green Data is being transmitted through the Ethernet interface.
The LAN connection is failed.
Description
Function
2