QNAP QSW-IM3216-8S8T Quick Installation Manual page 4

EN
Accessing the Web User Interface
By default, the QSW - IM3216-8S8T switch support DHCP clients. When connected to a network, the switch
automatically obtains an IP address from a DHCP server. You can then use Qfinder Pro to locate the
switch and access QSS.
If the device is unable to connect to a DHCP server to obtain an IP address, you can access the web user
interface by changing the IP address of the computer to 169.254.100.102.
Note : Ensure that you change the IP address of the computer to its previous setting after configuring the switch.
The default IP address of the switch is 169.254.100.101.
Logging into the Web User Interface
Default username : admin
Default password : This is a unique and QNAP-encrypted [Cloud Key] consisting of the letter 'Q' followed
by eight digits, making it distinct for each device. Displayed on the device's label.
1
MGMT 1 2 3 4
2
3
4 5
LED Behavior
LED Status
Flashing green
1 System Status Steady green
Off
Green
Power status
2
(power 1, power 2, Red
power 3)
Off
Flashes amber
3 Locator
Off
Amber
Management
4
RJ45 Link and Flashes amber
Activity LED
Off
Green
Amber
Management
5
RJ45 Speed LED
Flashes green or amber
Off
Green (Left)
6 10GbE RJ45
Amber (Right)
Green (Left)
7 10GbE SFP+
Amber (Right)
9 11 13 15
10GbE 5 6 7 8
10 12 14 16
6 7
Description
Device is booting.
Device is booted.
Device is powered off.
Power status is fine.
Fatal error on the power.
Power is off.
The switch is being located.
Note: The locator LED flashes for 30 minutes
when the locator function is enabled.
The locator function is disabled.
The management port is operating as an uplink
port.
Data is being transmitted.
There is no network connection.
The network connection is operating at 1 Gbps.
The network connection is operating at 100 Mbps.
Data is being transmitted.
There is no network connection.
Link is operating at 10 Gbps, flashing: link up, off:
no link.
Link is operating at 5G/2.5G/1G/100 Mbps, flashing:
link up, off: no link.
Link is operating at 10 Gbps, flashing: link up, off:
no link.
Link is operating at 1 Gbps, flashing: link up, off:
no link.