Cisco Nexus 9364D-GX2A Hardware Installation Manual page 25

Nx-os mode switch

Hide thumbs Also See for Nexus 9364D-GX2A:

Installing the Chassis

Installing the Switch using the NXK-ACC-KIT2-2RU Rack-Mount Kit

Step 7

If installing from the back of the rack, slide the chassis into the rack by aligning the inner rails into the outer rails, and

sliding the chassis forward until the front panel is flush with the front of the rack. Then slide the retainer screws out to

align with the rack and then secure the thumb-screws on the inner rails into the rack, as shown in the following illustration:

Cisco Nexus 9364D-GX2A NX-OS Mode Switch Hardware Installation Guide

Need help?

Do you have a question about the Nexus 9364D-GX2A and is the answer not in the manual?

N9k-c9364d-gx2a