onsemi FAN53730 User Manual

FAN53730 Evaluation Board User's Manual
3 A Constant-On-Time Buck Regulator
EVBUM2925/D
This user manual supports the evaluation kit for the
FAN53730. It should be used in conjunction with the
FAN53730 datasheet.
DESCRIPTION
The FAN53730 evaluation board is a compact circuit
including onsemi's FAN53730, 3 A Constant On Time
(COT) buck regulator in a 12-bump Wafer-Level Chip-Scale
Table 1.
Part Number Output Voltage
2
FAN53730UCX I C Controlled
•
Input Voltage Range: 2.3 V to 5.5 V
•
Output Voltage: Programmable from 0.3 V to 2 V
•
Pin Selectable Defaults
•
Low Quiescent Current: 12 mA
•
Internal Soft-Start Limits Input Current During Turn-On
•
2.5 MHz Switching
Conduction Operation
© Semiconductor Components Industries, LLC, 2025
January, 2025 − Rev. 0
VSEL
VSET1, VSET2
Frequency in Continuous
EVAL BOARD USER'S MANUAL
Package (WLCSP). The device's constant on time topology
provides the fastest transient recovery and optimal efficiency
vs. load due to its variable frequency operation.
The evaluation board provides probe access points to all
key circuit nodes so that electrical characteristics can be
measured.
Features
PG FCCM
Yes Yes
•
Fault Protection (Input Under Voltage, Short Circuit,
Over Current, and Thermal)
•
Power Good Output (PG)
•
Forced Continuous Conduction Mode (FCCM)
•
Audio Reduction Mode Eliminates Audible Tones Due to
Switching
•
−40 °C to +85 °C Ambient Temperature Range
•
This is a Pb-Free Device
1
www.onsemi.com
2
I C Address Temperature Range
−40 °C to 85 °C
7h'20
Publication Order Number:
EVBUM2925/D