Partlow MRC 7000 Installation, Wiring, Operation Manual page 34

34
STEP DESCRIPTION
53 Pen(s) Profile/ (Control)
Profiles/(Profile)
Configuration
(only seen on 2 pen instr.)
54 Chart Rotation Time
55 Pen Action on Power Up
56 Chart Operation
in Off Mode
57 Communication
Configuration
58 Communication Bit
Rate Selection
Will not be seen if
Con=0
59 Communications
Address-Pen 1
Will not be seen if
Con=0
60 Communications
Address-Pen 2
(If provided)
Will not be seen if
Con=0
DISPLAY AVAILABLE
CODES SETTINGS
PPC 1 or 2
1=Pen 1 profiles & controls
process.
Pen 2 (if present) records
& controls process.
2=Pen 1 profiles & controls
process.
Note: Time base between
both pens are shared.
Crt 0.1 to 999.9 hours per
rotation
PAPu 0=Pen(s) go to the "home"
posistion (toward chart
cetner) when powered up
1=Pen(s) remain in last
position prior to power down
Coo 0 to 1
0=Chart continues rotating
in the Off mode
1=Chart stops rotating while
in the Off mode
COMMUNICATIONS OPTIONS PARAMETERS
CCon 0 to 4
0=Off
1=Monitor Mode (Read Only)
2=Normal Mode (Read and Write)
3=Total Access with Limit Checking
4=Total Access without Limit Checking
CbS 1 to 6
1=300
2=600
3=1200
4=2400
5=4800
6=9600
CAd1 0 to 99
CAd2 0 to 99
FACTORY YOUR
SETTING SETTING
1
1.0
0
0
3
6
1
2