Coast PS00 Manual

Table of Contents

Contents

1 OVERVIEW
2 LASHLIGHT CONSTRUCTION
3 USING THE LIGHT
4 ADJUSTING THE BEAM
5 POWERING THE LIGHT
6 WARRANTY
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

Coast PS00 Manual

OVERVIEW

LASHLIGHT CONSTRUCTION

The PS200 is composed of COAST's proprietary Polysteel® construction, which features astainless steel core with a textured poly-nylon exterior.
The body of the flashlight is storm proof, drop proof, and crush proof.

USING THE LIGHT

The PS200 is equipped with COAST's Pure Beam™ optic featuring a three-setting lighting sequence.
Use the Quick-Cycle™ switch system to cycle through high, medium, and low brightness settings by partially depressing the power button.
After finding the desired setting, completely depress the power button to turn on the flashlight.

ADJUSTING THE BEAM

Built with Twist Focus™ technology, the PS200 can be easily adjusted between an Pure Beam" flood beam and a Bulls-Eye™ spot beam.
To pinpoint the beam on a precise area, rotate the bezel of the flashlight clockwise. To expand the beam and maximize the lighting area, rotate the bezel counterclockwise.

POWERING THE LIGHT

The PS200 is powered by three Coast Extreme Performance AAA alkaline batteries (included) or a COAST Zithion-X™ rechargeable battery (not included). To change the batteries, open the battery compartment by unscrewing the tailcap. Remove all three batteries, discard, and install three new AAA alkaline batteries.
Be sure the alkaline batteries are correctly oriented before closing the battery compartment.
The PS200 is compatible with standard AAA alkaline batteries.

WARRANTY

The PS200 is protected by COAST's lifetime warranty.
For expedited warranty service, visit: coastportland.com.

The PS200 is compatible with AAA alkaline batteries or a COAST Zithion-X™ rechargeable battery only.
Do not attempt to power the PS200 with lithium, carbon-zinc, or aftermarket rechargeable batteries.
When replacing the batteries, do not mix old and new batteries.