eufy Security Indoor Cam 2K Pan & Tilt, Indoor Cam E220 2K Manual

WHAT'S INCLUDED

Indoor Cam 2K Pan & Tilt
Model: T8410
Mounting Plate
USB Cable
USB Adapter
Mounting Screw Pack
User Manual

PRODUCT OVERVIEW

Indoor Cam 2K Pan & Tilt

1. Lens
2. Microphone
3. SD card slot
4. Status LED
5. Speaker
6. Power input
7. SYNC button

SETTING UP THE SYSTEM

1. Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
   

1. Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the IndoorCam Pan 2K to your system.
2. Follow the on-screen instructions to complete the setup.

LED Status

MOUNTING THE INDOOR CAM

Select a Location for Mounting

The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.

• Disconnect the Indoor Cam from the power outlet before mounting.
• Keep the Indoor Cam at least 0.7 ft/20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance.
  

Mount the Indoor Camera

To mount the Indoor Cam on the ceiling, follow the steps below:

1. Place the positioning card against the ceiling and then mark the points at which drilling will be required.
   
2. Drill holes with a 5/16" (8 mm) drill bit.
   
3. Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with a Phillipshead screwdriver to fasten the mounting plate to the ceiling.
   
4. Align the grooves with the mounting plate and rotate the Indoor Cam clockwise until it clicks into place.
   

To mount the Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as the illustration below.

POWERING ON THE INDOOR CAM

Connect the Indoor Cam to a power outlet using the provided USB cable and USB adapter. After being powered on, the Indoor Cam will be connected to the system. When it is successfully connected, the status LED will turn solid blue.
Rotate the Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app. You are now all set to use your Indoor Cam.
Tip:
For troubleshooting, check Help on the eufy Security app.

CUSTOMER SERVICE

Call Us
United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us
Customer Support: support@eufylife.com
@EufyOfficial
@EufyOfficial
eufyofficial
Anker Innovations Limited
Room 1318-19,Hollywood Plaza, 610 Nathan
Road, Mongkok, Kowloon, Hong Kong